Spirax Sarco, the global leader in steam system engineering and management has expanded its product line to include a range of Bellows Seal Valves including the BSA and A3S isolation valves.

New automatic recovery module enables easy valve system commissioning and configuration.

Two types of these brass solenoid valves are available: direct acting and pilot control solenoid valves. Both types of valves are 2-port, 2-position, normally closed.

The series includes inert gas/spring-operated valves to control high-purity, aggressive, and corrosive liquid chemicals while allowing a flow rate superior to other similar valves on the market.

The valve is engineered to provide high flow rates at a working pressure of 6000 psig (413 bar) while delivering the shutoff performance needed to keep workers safe and systems operating in a variety of demanding applications.

The ABC works with any meter that has a pulse output and either a valve or pump. The operator uses the arrow keys to set the batch volume, then presses the start button.

The No Drip Internal Mix Atomizing Spray Nozzles work in the same way our standard atomizing nozzles do, but have the added benefit of positively stopping liquid flow when compressed air is shut off.

Threaded Line Vac Conveyors eject a small amount of compressed air to produce a vacuum on one end with high output flows on the other. Response is instantaneous and regulating the compressed air pressure provides infinite control of the conveying rate. Applications include scrap trim removal, material conveying, part transfer, fiber tensioning and filling operations.

The Type 7150 combines the technology of the ControlAir Type 200 Precision Air Relay with the high forward and reverse flow of the Type 6100, 1:1 Relay Volume Booster.

The valve offers a close-off pressure of 75 psi (5.2 Bar) ensures a safe shutoff in the event of a fuel train system failure and eliminates the need for additional safety components

The Eclipse is suitable for critical applications for liquid and gas delivery, medical, analytical and industrial automation requiring fine resolution and repeatability. In addition, the design allows for custom flow profiles.

The Electro-Pneumatic Valve Positioner mounted with ControlAir’s Type 950 Explosion-proof I/P Transducer is CSA, FM, and ATEX approved for use with natural gas.

With EXAIR’s siphon fed atomizing nozzles, users can coat, lubricate, cool, treat and paint a variety of products using compressed air and liquids with a viscosity of up to 200 centipoise. Used with water, atomizing nozzles are a way to evenly cool hot items in an automated process.

The 6100 series is a fully automatic system that does not require an operator to initiate purging or pressurization. It offers optional temperature sensors that can be mounted around the motor for alarm notification or cooling. Additionally, there is automatic pressure compensation for excess leakage from the motor.

The V707 is based on the trusted Daniel 700 Series valve design which includes a metal to metal seat and protected O-rings to handle harsh crude oil conditions. While users have to stop operations to maintain and replace diaphragm valves, the V707 will ensure minimum maintenance.

The Series 273 features a pinching mechanism that remains firmly in place to provide better tube retention and eliminates breakage or damage to the soft tubing

The Picomag update enables measurement of flow of electrically conductive fluids and the process temperature and conductivity. It enables commissioning with Bluetooth using the SmartBlue App and integration with IO-Link technology.

CPX-AP-I enables valve terminals to be moved closer to pneumatic cylinders. Process data in and out of each bus module is as much as two kilobytes. Scan cycles for a mix of both valve terminals and I/O are below one millisecond.

The addition makes the SLAMf Series an MFC from a U.S. supplier with NEMA 4X/IP66- rating and integrated EtherNet/IP communications as standard features. Therefore, this product series is a choice for the biotechnology and food and beverage industries, where hose-down/wash-down requirements are present.

These air operated conveyors are available with smooth ends, to fit into hose or tube and secured with a simple hose clamp or they are available with NPT threaded ends, to mount onto threaded pipe. They feature large throat diameters for maximum throughput capability.