The Sirius 3RN2 replaces the preceding 3RN1 series, and with widths of 17.5 and 22.5 millimeters these relays require less space in a control cabinet. A standardized supply voltage reduces the number of versions.

The E-727 is designed for multi-axis nanopositioning applications, such as 3D imaging in super-resolution microscopy, laser beam steering, and fast alignment applications.

SureMotion MXL series timing belts are 1/4-inch wide, have a 0.080-inch pitch, and are available in neoprene with fiberglass reinforcement and urethane with polyester reinforcement styles. Also referred to as sprockets, MXL-series aluminum timing pulleys have a 1/4-inch width and feature a smooth bore with setscrews, a 0.080-inch pitch and range in size from 10 to 120 teeth.

The Graphite platform is ideal for factory automation and process control environments that may include manufacturing, oil & gas, water/wastewater, power, utility transportation and maritime.

The EC044A is a 44mm brushless motor available in a range of lengths, windings and gear ratios to accommodate a range of user application requirements. The EC042B is a smaller 42mm motor.

The EXP-MS-N4X-AT-HV explosion proof motion sensor from Larson Electronics is designed for operators seeking a sensor rated for use in hazardous areas designated Class 1 Division 1 and Class 2 Division 1.

The confocalDT 2471 chromatic controllers are designed for high speed distance and thickness measurements of mirrored, transparent, shiny and diffuse surfaces.

The PowerXL DG1 is a 250hp general-purpose drive that incorporates an energy control algorithm, onboard industrial communication protocols and built-in harmonic reduction

The P-616 NanoCube XYZ piezo scanner is a redesign of PI’s successful P-611, 3D positioning stage. Now based on a parallel-kinematic design, with one moving platform for all 3 axes, higher precision and dynamics are available.

This system is well suited for automation applications such as robotics, automated de-stackers, sheet feeders and in-fixture (Poke-A-Yoke) where sensing from only one side is possible.

BEI Kimco developed Brushless DC (BLDC) motors DIT11-15 and DIH40-49 to meet the necessary specifications of the individual centrifuges including operating speeds approaching 25,000 RPM.

The DP15 was built with flexibility in mind, it provides wet / wet differential measurements which accepts liquids and gasses on both sides of the diaphragm.

The design is ideal for optical microscopy, scanning probe microscopy, x-ray transmission microscopy, and other applications where two-sided part access is required.

This addition to the drylin W toolkit is designed to enhance possibilities in applications including marine, aerospace, and stage technologies.

The MPTC software was initially developed to ensure the operation of compressor stations during voltage disruptions, caused by lightning strikes, winter storms or ice buildup on power lines.

The STAC6-Q-H stepper drive is ATEX and IECEx certified for Class I, Zone 2 locations, and UL certified for Class 1, Div 2, Group C & D locations.

The DSC6000 MEMS oscillators are solutions for use as clock references in small, battery-powered devices such as wearables and Internet of Things (IoT) devices and are suited for under-hood applications as well.

The drive’s size and power range, combined with PLC functionality, makes the VACON 20 a solution for packaging machine applications.

The AR59-AV vertical rotation stage is intended for: Micro robotics, metrology, vision systems, positioning of mirrors and lasers, laser machining or scribing, electronic assembly, testing, and photonics.

Model M7000 permanent magnetic DC motors, from RAE DC Products, are designed to provide the protection needed to operate in water and dust operating environments.