SintoGrind TC-X 630 is designed for flute grinding, profile grinding, and outside and inside diameter grinding. SintoGrind TC-X 630 works on a variety of materials including tungsten carbide, HSS, PCD, CBN, cermet and ceramics.

Three separate systems are available, specifically designed for high pressure, low temperature, and high temperature conditions. The Extreme Environment sensors and systems work in operating temperatures ranging from -320°F to +1000°F (+1200°F short term).

This triple-redundant architecture, is intended to meet the performance, reliability and cost requirements of the automotive market including the areas of Autonomous Vehicles, Self-Driving Taxis/Delivery Vehicles. ADAS Systems, Electronic Stability Control, Lane Keep Assist applications, etc.

The Type FA10 Coalescing Filter is specifically designed to remove liquid aerosols and sub-micron particles from compressed air. The Type FA12 Filter Regulator with Coalescing Filter combines the coalescing filter with a filter regulator in a piggy-back assembly.

These skids fully integrate UPS DC power, solar charging, generator interaction, motor controls, SCADA, power distribution (DC and AC), and data harvesting via IIoT or SCADA topologies.

They can alter voltage levels, amplify voltage at the end of long cables, or enable the creation of independent supply systems by means of electrical isolation.

The advantages of ZrO2 ceramic balls are: FDA/USDA/3A Dairy/Caustic washdown compliant, lighter than steel balls and can be used at extreme RPMs.

This receptacle with disconnect switch provides a secure power connection for portable or stationary electrical equipment in flammable locations.

Developers working with DAQ and PXI modules may immediately begin work with MAPS software packages such as ADLINK Connection Explorer (ACE), diagnostic tools, and testing utilities to analyze device functionality in one click.

From the electrical variables of a permanent magnet synchronous motor, the Safe Speed Observer calculates two redundant models of the motor – achieving a safety level for the calculated speed. The virtual sensor can be used for both linear and rotary synchronous motors.

Primarily designed to improve machining by eliminating tool head vibration, the system further helps maximize material removal rate (MRR) and can also provide real-time feedback for predictive maintenance purposes.

The three FLEX 5000 safety I/O modules provide distributed safety I/O for the Allen-Bradley Compact GuardLogix 5380 and GuardLogix 5580 controllers. The safety modules can be combined with FLEX 5000 standard I/O modules to achieve integrated safety and control in one distributed I/O platform.

Each slice offers a clip-in mounting system, while status LEDs help with visual diagnostics. It has a width of 11.5 mm, allowing for larger systems to be wired into a smaller panel, up to 64 modules can be connected per row.

Outputting in LAB format, the camera providesdetection of color flaws directly within the production process, and expands the options for designers of color linescan systems.

This toxic gas transmitter is equipped with a remote sensor that offers operators a sensor response testing system for hazardous locations. This unit is fitted with a hydrocarbon sensor that detects 0-200 ppm and is made with a cast aluminum housing.

The solid-state controlled ANVER VLS‑09 Vacuum Leakage Sensor sets itself to a system’s peak vacuum level, compensated for altitude and atmospheric pressure, and displays it on a color LCD.

The Forte Series combines fluid dispensing with increased throughput and productivity to handle applications such as flex circuit and printed circuit board assembly, electro-mechanical assembly, MEMS, underfill, precise coating, and encapsulation.

The Express-SL2/KL2 features the 6th/7th Gen Intel Core Processors (as well as Celeron and Xeon options) and supports the Type 2 pinout with legacy interfaces such as PCI-bus, PATA, and VGA.

Powered by a 6th/7th generation Intel Core i socket-type (LGA1151) processor with Intel Q170/H110 chipset, equipped with 2/4 PCIe/PCI slots for integrating add-on cards, and compatible with Microsoft Windows 7/10 operating systems, IPC-220/240 provides the system for traditional legacy control operations and industrial automation applications.

Jitter and eye diagram analysis works with existing histogram and precision measurement functions to help characterize signal quality in real-time making the MSO8000 a debug solution for serial data integrity.