These inductive couplers (BIC0073, BIC0074, BIC0075, and BIC0076) eliminate the need for mechanical slip rings. Their IP67 rating allows them to stand up to harsh environments, including oil and water, and internal temperature monitoring keeps them from overheating.

These typically include, but are not limited to, radial vibration, axial position, and bearing temperature measurements commonly encountered in machinery protection systems on pumps, motors, compressors, turbines, and other critical rotating and reciprocating machinery.

The MM-L300A is designed to detect production errors such as gaps between parts, missing parts, over-penetration, incorrect focus, and cover gas absence, providing operators feedback on laser weld quality. The unit supports laser welding technologies for spot or seam welds.

This module integrates an antenna capable of a 3-mile range, which allows a pair of modules to communicate in a point-to-point mode or modules can communicate directly to a SignalFire Gateway.

Antaira Technologies’ LMP-2004G-SFP and LMX-2004G-SFP series are industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

The black Thermoplastic Elastomer (TPE) cable outer jacket is flexible and resistant to sunlight, oil, and moisture penetration; making the cables suitable for wet and dry indoor and outdoor locations.

This solution was engineered with lower hardware requirements so it can reside in devices or be integrated directly into a larger mechanical or electrical system

With the DXF Overlay app from TAGARNO, users can import DXF files to their TAGARNO digital microscope. The file will appear as an overlay and an overview will show where the overlay is positioned in the field of view.

More than 350 standard ATS heat pipes provide cooling solutions for cloud and edge computing, electric vehicles, aerospace, agtech, robotics, medical and consumer electronics, data communications, telecommunications, HVAC and more.

ABB’s UNITROL 1000 series is an excitation product that is fully compliant with the European grid code pioneered in Germany. Compliance of ABB UNITROL 1000 devices to the German grid code (VDE-AR-N 4110 and VDE-AR-N 4120) has been validated by the TÜV NORD certification body.

Standard Air Wipes are CE compliant and available from stock in aluminum in diameters from 3/8″ (13mm) up to 11″ (279mm). Applications include wiping wire; drying inks; cooling hot extruded shapes; and blowoff of water, plating, coatings and dust..

The DGST slide and yoke plate are machined from a single piece of aluminum. Backlash free piston rod/yoke connection contributes to the slide. Twin piston drives and recirculating ball bearing guides provide the DGST with power– from 7.6 to 132.6 lbf (34 to 590 N) at 6 bar.

Marktech’s Models MTPD1346D-200 and MTPD1346D-300 are available in active area sizes of 2.0 mm and 3.0 mm, respectively, joining existing series InGaAs PIN photodiodes with 0.1 to 1.5 mm active areas.

The PSRswitch offers an RFID non-contact safety door switch system with M12 connections. The safety switch can be connected in a series with Y distributors, bridge plugs, and SAC cabling.

Fluke is adding condition monitoring data to IBM Maximo with Integrated Condition Monitoring for Maximo, a solution that incorporates real-time asset data within existing IBM Maximo workflows.

The small portable device can scan color on any object. It then links to a Color Sensor app which provides the paint color match.

The embedded CSB200-818 houses a 3.5-inch single board computer powered by an Intel Atom processor E3930, N4200 or N3350 and is equipped with 4GB (default) of DDR3L-1866 system memory that is upgradeable to 8GB.

This 2-watt unit operates on 30V DC and provides 200k ohm resistance. This device is used to support vehicle steering systems.

Marktech Model MTE6063M-UHR visible red LED emitters offer output power, typically 27.5 mW, along with a radiation pattern, and a peak emission wavelength of 630 nm.

These capacitive sensors are suitable for detecting the presence of solids, but are equally good at detecting material or liquids like granulates, sugar, oil, and aqueous media through a nonmetal wall, such as packaging, glass or plastic, with a maximum thickness of 4 mm.