Industry Products

Point Grey Improves FlyCapture image software

FlyCapture 2.3 now leverages Direct2D technology for better image rendering performance on Windows 7.

01 August, 2012

Point Grey introduces FL3-GE-03S1 120 FPS cameras

FL3-GE-03S1 delivers VGA resolution at 120 FPS in a low-cost, ultra-compact, GigE package.

18 July, 2012

Toshiba introduces ESV16 16-channel network video recorder

ESV16 is a flexible network appliance with support for up to 16 IP cameras, 12TB of removable hard-drive storage, and maximum data transfer rates of 250 Mbps.

By: Toshiba Machine Co.,America

11 July, 2012

Vecow announces ECS-5600-3V embedded vision controller

ECS-5600-3V is suitable for multi-camera industrial inspection, high speed measurements, and continuous inspection of security and surveillance.

01 July, 2012

Teledyne DALSA releases three Genie TS Cameras in Color

Genie TS color cameras include 5M, 8M and 12M models and reach speeds up to 29 fps.

By: Teledyne

27 June, 2012

EVT introduces ChipEye 5Side vision command set

With ChipEye, a component part can be captured with the camera and evaluated by the software from five different sides at the same time.

06 June, 2012

Point Grey releases FL3-U3-13Y3M-C CMOS Camera

Compared to CCD, a CMOS shutter eliminates blooming, smearing, and consumes less power at higher frame rates.

04 June, 2012

Cognex introduces SensorView 2 display for Checker Vision Sensors

With SensorView 2, engineers can configure, test and monitor Checker 4G vision sensors without a PC being required at any stage.

By: Cognex Corporation

31 May, 2012

e-con Systems releases e-CAM51_USB Camera Module

USB camera has a 5-megapixel pluggable Autofocus Camera Module and supports GPIO and microphone with an integrated analog-to-digital converter.

31 May, 2012

EVT announces Industrial 3D-Eye vision system

Applications for the 3D sensor include palletization, depalletization and sortation of components on the assembly line.

31 May, 2012

Lenox adds Internet to its Furnace Camera HD Systems

Ethernet camera systems allow users to record camera output on a network connected PC, server, or digital video recorder and then access images rom any PC on the corporate network or the internet.

22 May, 2012

PPT Vision Announces MX20 Processor

The MX20 processor features an Intel dual-core processor and two independent PoE (Power over Ethernet) camera ports and works at distances up to 100m from the processor to the camera.

By: Datalogic, Inc.

17 May, 2012

AVT releases Prosilica GT2000 2.2 Megapixel camera

Prosilica GT2000 is ideal for applications such as machine vision, motion control or high speed inspection in extreme conditions.

By: Allied Vision Technologies

15 May, 2012

IMPERX introduces tough ICL-B6640 Bobcat camera

Camera has an extended operating temperature range of -40°C to +85°C and an MTBF of 660,000 hours @ 40°C.

02 May, 2012

PPT Vision Announces MX80 Video Processor

MX80 has an Intel Core i7 quad-core processor, with 4 GB memory and four independent gigabit PoE (power over Ethernet) ports for up to four unique camera inspections running parallel.

By: Datalogic, Inc.

30 April, 2012