The PowerPAK addresses the need for localized instrument power for new and existing applications when power is not readily available.

This wireless access point provides wi-fi bandwidth necessary for real-time safety monitoring, including Emerson’s Location Awareness and wireless video. These applications are intended to enhance personnel safety practices, improve plant security and help ensure environmental compliance.

This gateway, designed for Class 1 Division 2 Groups C and D locations, supports wireless configuration up to 240 remote nodes at 3+ mile typical range and interfaces via RS-232 Modbus RTU or Modbus-TCP (Ethernet).

The NCA-6210’s NIC expansion slots and compatibility with F.A.S.T. module solutions make it a hardware solution for application delivery, mobile edge computing, WAN optimization, DPI/IPS/IDS, NFV/SDN and NGFW/UTM.

The Lock 150 can be installed in less than five minutes without the need for software installations, network configurations or special IT skills, and provides capacity for up to 10 concurrent VPN connections.

Treon Industrial Node is a battery-operated condition monitoring device that measures tri-axial vibration and surface temperature of rotating equipment, such as pumps, motors and agitators

The Ethernet Direct Layer 3 switches are a combination of technologies in hardware and software engineering to adapt to harsh industrial environments.

This module integrates an antenna capable of a 3-mile range, which allows a pair of modules to communicate in a point-to-point mode or modules can communicate directly to a SignalFire Gateway.

Antaira Technologies’ LMP-2004G-SFP and LMX-2004G-SFP series are industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

The STRIDE MQTT gateway provides hardware setup to add Modbus RTU/TCP devices to an existing MQTT cloud data collection platform. The MQTT gateway interfaces with up to 32 Modbus devices; wired and Wi-Fi gateway models are available.

Antaira Technologies’ LMP-1600G and LMX-1600G series are industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

By tunneling HART traffic over SignalFire’s proven 900MHz platform, the Link Scout allows maintenance personnel to configure, calibrate and troubleshoot assets equipped with a HART-enabled instrument using DTM software.

The NCS2-MINIPCIE02 is a PTCRB-certified Wi-Fi/3G/4G/LTE NIC module suited for operators and device manufacturers located in regions where PTCRB interoperability/compatibility (cat-3 & cat-6) is a requirement.

Fiber is most commonly associated with long distance connections. This technology is intended to enhance network with additional bandwidth capacity, and can carry multiple signals concurrently, protecting data from noise and interference without electromagnetic emissions.

This online plant noise surveillance system employs wireless technology and explosion-proof sensors. Even in plants where noise levels change drastically over time, noise mapping can be applied to plan work schedules that will ensure workers do not exceed specified limits for number of work hours in a noisy environment.

Based on the Qualcomm 9205 LTE modem and featuring optional 2G fallback, the modules also provide a future-proof foundation for IoT deployments that span legacy networks, 4G and 5G.

The LNP-0800-60-24 series’ unmanaged switches are designed for expanding the network on the outer edge. Four ports of IEEE 802.3bt 60W 4PPoE power gives users the flexibility to add intelligent devices the network, while still maintaining 4 ports of IEEE 802.3at PoE+ 30W power needed for traditional PoE edge devices.

Both devices are designed to monitor equipment health and prevent mechanical failures before they occur.

Key to the upgrade interface that provides full visibility and holistic transparency into network status. MXview will generate reports, including inventory, traffic and availability, that empower customers to transform system metrics into IIoT performance indicators.

IoTMeter is a wireless equipment runtime monitor and alert system. The device remotely collects real-time data on offline industrial vehicles and powered equipment.