The ILPS-27 series consists of contactless devices designed for factory automation and a variety of industrial or commercial applications such as motor sport vehicles, automotive testing, solar cell positioners, wind turbine prop pitch and brake position, and packaging equipment.

Weidmuller’s IP20 and IP67 IO-Link Master modules feature web-based configuration and monitoring. This allows users to change parameters using the web server, and provides for both on-site and remote testing and diagnostics without the need for additional software.

The AQ120 series of linear stages features steel linear ball bearings and steel shafting and are designed for loads of 15 kg (33.1 lbs) for the AQ120-50 to 5 kg (11 lbs) for the AQ120-300. The AQ130 series of linear stages features open steel linear ball bearings and supported hardened steel shafting and is designed for loads to 30 kg (66.1 lbs) for all travel lengths.

The high flex, shielded M12 Ethernet CAT5E patch cables have a TPE (thermoplastic elastomer) jacket designed for typical industrial applications. This Ethernet cable is flame retardant, chemical resistant and resistant to welding sparks.

PCB’s accelerometer, Model HTJ356B01 is suited for applications that demand ground isolation to reduce electrical noise and ground loops on test articles in higher temperature environments .

LM76's Pegasus Series 1 Linear Bearings feature Silicon Nitride (SiNi) Ceramic Balls in a shell with retainer and end caps all made from 440 Stainless Steel and then ArmorloyTM coated.

The digiVIT is a self-configuring system, which is capable of performing with nearly any sensor, from any manufacturer, as well as any conductive target. The transducer also features pushbutton calibration, temperature compensation, and zeroing.

The ILPS-45 linear position sensors are specifically designed for measuring applications requiring rugged devices, whether measuring position of steam turbine valves, mounted in a paper mill head box or calendar roll stand, or outdoors fastened to a building, bridge or structure.

The U-723 joins PI’s existing portfolio of linear stages. It provides more than 0.8” travel per axis (22x22mm), with a footprint of 42x42mm (1.6x1.6”).

Fluke Condition Monitoring is a cloud-based software platform in combination with electrical, temperature, and power quality monitoring sensors to support condition-based maintenance programs.

With an installation depth of only 49 mm, the A02H comes in a variety of frame sizes, physical mountings, shaft sizes and isolation inserts that protect the encoder from shaft currents.

Designed for high-temperature and hydrogen applications, the CGS-FlexVu UD10 system performs as a gas detector, display and controller for the detection of both hydrocarbon and hydrogen gases.

These modules are single or dual 6-channel multiplexers with relays mounted on the front panel. They are suitable for switching 50Ω signals up to 50GHz. The single slot version can support up to three remotely mounted multiplexers

The cameras are “powered over Ethernet“ and particularly developed for the factory automation, e.g. for robot plant construction and mechanical engineering.

The HI 6600 series is designed to support weighing applications in process and packaging such as inventory management, blending, filling and checking.

Softing’s dataFEED OPC Suite combines a full package of components for OPC and IoT cloud communication within a single product. In addition to the integrated REST interface, the MQTT gateway and OPC UA support enable integration of legacy and new controllers into cloud solutions such as Microsoft Azure or IBM Bluemix.

A pluggable terminal block is composed of a plug and a mating socket. The socket is usually attached to a printed circuit board through pins. The plug fits into the socket, and the wires connect to the socket via Dinkle’s patented push-in-design.

The 3D sensor is designed to ensure quality assurance on automated production lines and can be used both for inspecting incoming materials as well as for output control

A solution for applications that require X-Y or X-Z distance, high-speed motion with a load and moment loading capacity, IntelliAxis is ideally configured for pick & place, sorting, loading, assembly and other material handling tasks in industries such as packaging, food and beverage and automotive.

Brackets are available for inductive, magnetic, capacitive and ultrasonic proximity sensors, along with photoelectric, laser and fiber optic sensors, and in 3, 4, 5, 6.5, 8, 12, 18 and 30mm sensor sizes