The HIPERFACE DSL open interface is designed to bring together all the advantages of a digital real-time interface: One Cable Technology, and continuous condition monitoring.

The E2M features a solenoid valve integrated with a pressure and a flow sensor in one package. These units flow up to 5,000 liters of compressed air per minute, program, and can connect to Festo MS series air preparation units.

This speed advantage makes the F58 encoders suited to packaging, textile and printing applications—or any other application with fast machines that could be even faster with a position sensing upgrade.

The WPBHC-series RJ45 bulkhead couplers are available in both Category 5e and Category 6 versions and are shielded for maximum EMI/RFI protection.

The LNP-1002G-10G-SFP-24 is industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as, manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

NEXCOM's latest series of EtherCAT slave I/O modules provides EtherCAT communication and compatibility for machine control and robotic control applications.

The LNX-1202G-10G-SFP is industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

The network security platform features six Gigabit Ethernet ports using Intel i211 Ethernet controller, and one pair of LAN bypass function.

The HART Multiplexer System by GM International is designed to offer the possibility to reduce the number of multiplexer modules, while maintaining ability to control up to 7936 channels.

This family of serial device servers and gateways support most common industrial protocols, with various combinations of HART, HART IP, Profinet, Modbus TCP, Modbus RTU, Raw/ASCII, and EtherNet/IP.

The platform, for data acquisition common in machine-building applications, includes PROFINET master or slave operation, I/O configuration, and “last-breath” operation in the event of power failure.

The LNX-2602G-SFP series is industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh environments, such as, manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation. This switch is also designed for setting up a dedicated network for optimizing VoIP and video application.

The technology fosters OT & IT collaboration for enterprise-wide protection of critical infrastructures such as power generation and distribution, water and wastewater, transportation systems and infrastructure like trains, bridges and tunnels, intelligent building management, manufacturing, oil and gas, and other applications that rely on high availability industrial automation.

This combination creates a full transceiver that can transmit and/or receive wide-bandwidth signals of up to 2 GHz of bandwidth in real time, covering spectrum from 27.5 GHz to 29.5 GHz

The cDAQ-9185 and cDAQ-9189 provide time synchronization with TSN to simplify and improve scalability of synchronized, distributed systems.

When installed straight out of the box, the Stratix 2500 industrial Ethernet switch can prioritize critical industrial network traffic. It also can be configured for application-specific needs.

The NCA-1031, powered by the Intel Atom x7-E3950 or x5-E3930 processor, is a desktop form factor network appliance designed for entry-level network security, gateway or vCPE.

Perle IDS-500 PoE Industrial Managed Switches come with a PRO Feature Set to meet the needs enterprise-grade level environments where additional security and network integration functionality is required

The SWE440 provides an Ethernet-based system interconnect that allows single board computers, digital signal processors, graphics cards, sensor I/O cards and others to pass data at multi-Gigabit speeds

With its protocol configuration, mounting design, and interface, the SDS-3008 is a networking solution for virtually any Smart Factory application. It supports the core industrial protocols -- EtherNet/IP, PROFINET, and Modbus/TCP -- and includes built-in network monitoring and control functionality.