The X-gateway is a compact device for standard DIN rail mounting and requires a 24 Volt industrial power supply. It functions as a Slave on the DeviceNet network and as a Master on the Profibus side. The Profibus Master functionality is configured with HMS´ Anybus NetTool for Profibus, a powerful but easy to use Windows-based configuration tool which comes free of charge with the X-gateway. After the initial configuration has been downloaded into the X-gateway, it passes up to 512 byte of input and 512 byte of output data transparently between the two networks. Up to 124 Profibus slaves can be connected to the gateway.
The X-gateway contains Profibus and DeviceNet communication interfaces that have been certified for full compliance to the respective protocol standards. The Anybus X-gateway family is a product line consisting of over 200 proven, robust and ready-to-use gateways aimed to connect almost every possible combination of two industrial networks. The product family supports 17 different fieldbus and industrial Ethernet networks such as Profibus, DeviceNet, CANopen, CC-Link, EtherNet/IP, Profinet and many more. All versions work the same way and provide a flexible standard solution to connect two industrial networks.
Features & Benefits
- Simple way to transmit I/O data between any two industrial networks- Interconnects different PLC systems (Siemens, Rockwell, Schneider, Mitsubishi, Hitachi, Beckhoff, etc.)- Supports over 200 different network combinations (master, scanner, slave, adapter, I/O device, server)- Robust industrial design allowing for use in harsh industrial environments- Coupling/decoupling different parts of a machine using a similar or dissimilar network- Can reduces infrastructure costs by eliminating an additional PLC or rack mounted device and accessories- Fast I/O data transfer with average timing between networks: 10 - 15 ms- Instant connectivity, no programming required- Profibus Master technology based on Siemens ASIC ASPC2 Step E with Infineon C165 Microprocessor- Connects up to 124 Profibus slaves - Profibus network configuration via an RS-232 config port and via the free and included NetTool-PB for Windows- Max 512/512 byte IO data IN/OUT- Supports DeviceNet I/O Slave messaging: Bit strobe, Polling, Cyclic & Change of State (COS) & Explicit messaging- DeviceNet baud rate 125-500 kBit/s - Power supply 24VDC- Tested and verified for full DeviceNet and Profibus conformance- CE, UL, ATEX, Haz Loc and RoHS conformance
