May 9, 2010 - ASI just released a DIN rail mount busbar system. It is one of the easiest-to-use, electrician friendly, electrical connection systems on the market. This electrical busbar system features supports for the 3x10 mm busbar that will allow you to mount a double or triple the full one-meter length directly on a DIN rail. The unique wiring terminals eliminate the need for drilling and tapping of the busbar and crimping of terminals on the ends of wires, thereby saving a considerable amount of time. The terminals also come with a colored plastic housing that can be used to visually designate the lead type, such as green yellow for ground, blue for neutral and red or black for L1, L2 or L3.
Some of the key features of this product line that will help you on your power distribution or bussing application are:
- Terminals clamp wires directly to busbar, reducing time and cost
- Terminals handle from 20 AWG wires up to 1/0 cable
- Terminals include color-coded plastic housings
- One meter busbar can be cut to any length
- Supports available for 2 or 3 busbars
- Terminal can be labeled
The ASI busbar system is made up of 3 parts; the busbar, the supports and the terminals. No special tools are required, just mount and terminate.
