March 17, 2016 - CAMI Research announces Micro-Match test board. Sold as a set of two boards, each Micro-Match test board may be paired with other CableEye adapter boards to accommodate any combination of connectors.
Populated with solder pads to accept a suite of TE-Connectivity Micro-Match connectors, the board addresses markets plagued by vibration and fretting corrosion, and requiring “miniaturized connectivity.” Rated to 500Vdc/350Vac, the CB49 may be used on all CableEye models.
The CB49, sold without connectors, contains nine sets of 20 solder pads accommodating numerous configurations of Micro-Match connectors. There are nine preset locations for automatic detection & display of 4, 6, 8, 10, 12, 14, 16, 18, and 20-pin connectors (as denoted by screenprinted labels). Yet, any single set may be fitted with any combination of lower pin count connectors that total to 20 or less (e.g. a 14-pin with a 4-pin).
Connectors soldered in non-preset positions will also appear graphically correct once they are mapped with PinMap (optional software).
Customers requiring this board typically have products that endure vibration for which connectors would normally be at risk of fretting corrosion failure e.g. products for Robotics and for Domestic, Commercial & Industrial Vehicular (Radios, Navigation Systems, Dashboard Systems) markets.
Price: $195.