-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Author Profile
Charles Chen
59,091 Results Found
-
Feature
Network Monitoring: Passive, Active or Both
By Zane Blomgren, Tripwire There is little doubt that the need for OT operators to adapt to stronger cyber security postures is getting increasingly urgent. Yet, there are a lot of myths and misconceptions that could very well hinder many operators from taking the appropriate actions -
News
Claroty announces Admiral (Ret.) Michael S. Rogers as Chairman of the company’s Board of Advisors
As Chairman of Claroty’s Board of Advisors, Rogers will lead a distinguished cadre of business and security leaders to provide guidance and counsel to the company and its customers on emerging cybersecurity trends and requirements. -
News
Inductive Automation announces partnership with FreeWave Technologies for enhanced IoT data visibility
The two companies span many common verticals to include oil & gas, utilities, and agriculture markets that require the collection of sensor data for process optimization, preventative maintenance, and compliance reporting. -
News
MDISS announces best practices for securing medical systems based on ISA/IEC 62443 series of standards
The intent is to share the information across the network of MDISS member organizations, which includes medical device manufacturers, healthcare software companies, hospital networks, and insurance companies. -
Industry Product
Averna releases version 2.0.0 of Jupiter 310 Design Verification System
Averna’s Jupiter 310 Design Verification System is the industry standard for automated DOCSIS3.1 physical (PHY) layer pre-certification testing. It provides the test coverage for DOCSIS 3.1 devices. -
Industry Product
ITSENCLOSURES announces PB282626-0 printer enclosure
The cabinet is designed to shield desktop laser printers (such as Brother, Canon, HP, and Ricoh) and thermal transfer label printers (such as Zebra, Cognitive, Honeywell, and Intermec), on dusty, dirty, and wet factory floors -
Industry Product
ACIENNA introduces MCx1101 family of ±5A, ±20A, and ±50A current sensors
The MCx1101 are fully integrated, bi-directional current sensors that offer DC accuracy and dynamic range. For example, the ±20A version has a typical accuracy of ±0.6% and are guaranteed to achieve an accuracy of ±2.0% (max) at 85°C. -
Industry Product
E+E Elektronik introduces EE8915 CO2 sensor
The EE8915 from E+E Elektronik meets railway standards for CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. -
Industry Product
EXAIR releases Soft Grip Back Blow Safety Air Gun
An array of holes on the Model 1004SS M4 Back Blow Air Nozzle provides a back-facing 360-degree airflow to clear out coolant, chips and light oils from machining processes. -
News
Frost & Sullivan Report: Big Data technology driving proactive cybersecurity solutions
Frost & Sullivan’s recent analysis, Envisioning the Next-Generation Cybersecurity Practices, presents an overview of cybersecurity in enterprises and analyzes the drivers and challenges to the adoption of best practices in cybersecurity. -
News
Recipharm announces Kieran Chouhan as Director of Business Management
With over 8 years of experience working in the North American CDMO industry, Kieran Chouhan joins the business management team at Recipharm to lead sales activity in North America. -
Feature
Making the IoT Work for Test
By Mike Santori, National Instruments The IoT and IIoT are making test more complex. IoT technologies can help address automated test challenges. Engineers need to understand and focus on the use cases with the most business value. -
Industry Product
Aerotech introduces AGV-SPO single pivot-point galvanometer scanner
The AGV-SPO is available with a selection of optical coatings and focusing optics to support a variety of commonly-used laser wavelengths and focal lengths. Customized optics and optical mounting features are available upon request. -
FeatureWebinar Recording: Practical Limits to Control Loop Performance
Learn the contribution of each PID mode, why reset time is orders of magnitude too small for most composition and temperature loops, and other PID controller issues. -
Industry Product
Power Partners releases PSAW65I Series of 65W interchangeable AC blade wall mount power supplies
The PSAW65I Series packs 65W into a case measuring 4.62” x 1.98” x 1.4” with a 4-foot-long dc output cable, terminating in a 2.1mm barrel connector. -
Industry Product
Mitsubishi Electric introduces TM-RG2M / TM-RU2M direct drive motors
The TM-RG2M / TM- RU2M Low-Profile Direct Drive Motor is coupled directly to a load. It is designed for use in industries such as semiconductor / LCD manufacturing, machine tool, material handling and inspection. -
Industry Product
Nicholson announces line of industrial steam traps
The product line includes mechanical, orifice, thermostatic, thermodynamic, and clean steam designs. A global network of technically trained Nicholson applications experts can help with steam trap sizing and selection. -
Industry Product
TRENDnet announces EN50155 M12 Gigabit PoE+ Railway Switch
TRENDnet’s 8-Port Industrial EN50155 M12 Gigabit PoE+ Railway Switch (TI-TPG80) is specifically designed for use with moving buses, railways, and other rolling stock applications. -
Industry Product
SPECTRO announces SPECTROGREEN plasma optical emission spectrometry (ICP-OES) analyzer
The SPECTROGREEN analyzer is designed for routine analyses in environmental and agronomy applications as well as consumer product safety, pharmaceuticals, petrochemicals, chemicals, and foods. -
Feature
To CNC or not to CNC?
By Jonathan Wilkins In industry, both 3D printing and CNC machining allow manufacturers to produce complex parts but sometimes it can be difficult to know which technology will better suit an application. This article discusses the applications for CNC machining and additive manufacturing.