Differential encoder input signal is converted into a pulse signal directly
Keywords: Encoder | differential signal | pulse | isolated converter | Signal Conditioner
Features:
>> Differential encoder input signal is converted into a pulse signal directly
>> Support A, B, and Z three-phase differential simultaneous conversion
>> 3 inputs, 3 outputs, selectable output pulse amplitude
>> No change the original waveform frequency, response speed is over 500KHz
>> Three-isolation:signal input/Power/signal output 3000VDC
>> Power supply: 5V, 12V, 15V or 24V DC single power supply
>> Low cost, high small size, ease of use, reliability
>> Standard DIN35 rail mounting
>> Dimensions: 120 mm x 70 mm x 43mm
>> Industrial Temperature Range: - 45 ~ + 85 ‚ÑÉ
Application:
>> Encoder differential signal isolation, acquisition and conversion
>> Differential encoder 24V square wave pulse signal transduction
>> Servo encoder signals to the PLC differential
>> Pulse signal amplification and shaping
>> Ground interference suppression
>> Motor speed monitoring system
>> Speed ‚Äã‚Äãmeasurement and alarm
>> Signals without distortion transmission and transmission
Products Listing:
DIN33 IAP – S‚ñ° - P‚ñ° – O‚ñ°
|
Input Signal
|
Power Supply
|
Output Signal
|
|||
|
input
|
code
|
Power |
code
|
output
|
code
|
24VDC |
P1 |
output level 0-5V |
O1 |
||
|
Single signal input,
peak value ( VP-P): 5V
|
S2 |
12VDC |
P2 |
output level 0-12V |
O2 |
|
Single signal input,
peak value ( VP-P): 12V
|
S3 |
5VDC |
P3 |
output level 0-24V |
O3 |
|
Single signal input,
peak value ( VP-P): 24V
|
S4 |
15VDC |
P4 |
Open collector output |
O4 |
5v differential pulse signal input |
S5 |
||||
user-defined |
Su |
user-defined |
Ou |
||