February 11, 2020 – Endress+Hauser launched its Promag W featuring the “0 x DN full bore”option, a solution for a close-knit pipeline network or obstacles in pipes.
Promag W 300/400/500 flowmeters with the “0 x DN full bore” option measure with accuracy (±0.5%), even directly downstream of pipe bends, T fittings, or insertion devices. They are particularly suitable for installation in tight spaces, such as compact systems or skids, because they do not need any inlet or outlet runs. The Promag W (0 x DN full bore) can handle swirls that frequently occur downstream of obstacles such as pipe bends and insertion devices, and even those downstream of unknown obstacles such as build-up on the pipe wall, protruding seals or different inside diameters.
The measuring concept of the Promag W (0 x DN) features multiple measuring electrodes to detect flow. These electrodes generate a higher density of measured data than standard devices. Together with the refined signal analysis, measurement results are realized in swirl conditions.
The “0 x DN full bore” option allows installation without inlet and outlet runs and without restriction, solving both challenges to deliver measured values and measuring operation.
Promag W can be combined with different transmitters: as a compact version (Proline 300 and 400), or as a remote version (Proline 400 and 500) with up to four inputs and outputs. The digital signal processing begins in the smart sensor and is the basis for a accurate measurement. Full access to all measurement data, including diagnostic data acquired by Heartbeat Technology, is possible at any time via digital data transmission.
