August 23, 2013—Endress+Hauser announces its November-December 2013 schedule of instrumentation training courses. Classes typically are a combination of classroom and hands-on training on either the Endress+Hauser Process Training Unit (PTU™), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands, both designed to simulate operating conditions.
For information on all E+H training schools, go to: http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-instrumentation-training
Courses include:
Level School – Introductory
Monday, November 4, 2013 - Wednesday, November 6, 2013 in Mobile, Alabama The Endress+Hauser L-101 introductory course for level provides maintenance and engineering personnel with a basic understanding of level technologies that apply to virtually any manufacturer's equipment. It includes in-depth training on Time of Flight (ToF) technologies that include a variety of radar types as well as ultrasonic level transmitters.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/L101
Certified PROFIBUS PA Engineer Training
Monday, November 4, 2013 - Friday, November 8, 2013 in Gonzales, Louisiana The Endress+Hauser C-201 Certified PROFIBUS PA Engineer Training is an intensive hands-on and theoretical 4-day, 24-hour training program. Upon successful passing of the final examination the participant will receive a certificate and the right to bear the title "Certified PROFIBUS PA Engineer." All successful participants will be listed on the official PROFIBUS homepage.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/C201
Basic Instrumentation School
November 5, 2013 - November 7, 2013 in Matthews, North Carolina The Endress+Hauser I-101 introductory course to instrumentation provides maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations that are applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-control-training-basic
Flow School Coriolis
Tuesday, November 5, 2013 in La Porte, Texas The Endress+Hauser F-103 Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment. It also provides in-depth training on density and concentration measurements.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F103
Time of Flight (ToF) School
Wednesday, November 6, 2013 in La Porte, Texas The Endress+Hauser L-102 time of flight (ToF) course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters, that apply to virtually any manufacturer's equipment.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/L103
Level School - Advanced
Wednesday, November 6, 2013 - Friday, November 8, 2013 in Mobile, Alabama The Endress+Hauser L-102 advanced course is for students having completed the basic level school. The Advanced Level School begins with a brief review of current level technologies. Following the technology refresher, the course looks deeper at each level measuring technology including proper techniques of configuration, calibration and troubleshooting.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/L102
Pressure & Temperature School
Thursday, November 7, 2013 in La Porte, Texas The Endress+Hauser P-101 Pressure & Temperature School provides maintenance and engineering personnel with a basic understanding of numerous pressure and temperature technologies that apply to virtually any manufacturer's equipment, as well as the skills needed to set up and maintain such equipment.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/P101
Basic Instrumentation School
November 11, 2013 - November 15, 2013 in Memphis, Tennessee The Endress+Hauser I-101 introductory course to instrumentation provides maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations that are applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-control-training-basic
pH & Conductivity Measurement School
Tuesday, November 12, 2013 in Greenwood, Indiana The Endress+Hauser A-101 pH & Conductivity measurement school provides maintenance and engineering personnel with a basic understanding of pH and conductivity analytical technologies that apply to virtually any manufacturer's equipment. Following the introduction, it proceeds with in-depth training on pH and conductivity.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-instrument-training-ph
Liquid Analytical Measurement School
Tuesday, November 12, 2013 - Wednesday, November 13, 2013 in Greenwood, Indiana The Endress+Hauser A-102 Liquid Analytical Measurement School provides maintenance and engineering personnel with a basic understanding of numerous analytical technologies, including pH, conductivity and chlorine monitors that apply to virtually any manufacturer's equipment.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/A102
Liquid Analytical Measurement School
Monday, November 18, 2013 - Wednesday, November 20, 2013 in Gonzales, Louisiana The Endress+Hauser A-102 Liquid Analytical Measurement School provides maintenance and engineering personnel with a basic understanding of numerous analytical technologies, including pH, conductivity and chlorine monitors that apply to virtually any manufacturer's equipment.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/A102
Flow School – Advanced
Tuesday, November 19, 2013 - Thursday, November 21, 2013 in Matthews, North Carolina The Endress+Hauser F-102 advanced course on flow measurement is designed for students who have successfully completed the basic Flow School Course. The class will start by providing instrument techs and engineers with a brief section on the basic understanding of numerous flow technologies. Following this introduction, it proceeds with in-depth training on vortex shedding, electromagnetic, ultrasonic, and Coriolis flow meters, plus Density and Viscosity measurements.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F102
Flow School Coriolis
Tuesday, November 19, 2013 in Chalfont, Pennsylvania The Endress+Hauser F-103 Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment. It also provides in-depth training on density and concentration measurements.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F103
Time of Flight (ToF) School
Wednesday, November 20, 2013 in Chalfont, Pennsylvania The Endress+Hauser L-102 time of flight (ToF) course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters, that apply to virtually any manufacturer's equipment.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/L103
Pressure & Temperature School
Thursday, November 21, 2013 in Chalfont, Pennsylvania The Endress+Hauser P-101 Pressure & Temperature School provides maintenance and engineering personnel with a basic understanding of numerous pressure and temperature technologies that apply to virtually any manufacturer's equipment, as well as the skills needed to set up and maintain such equipment.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/P101
Flow School Coriolis
Tuesday, December 3, 2013 in Matthews, North Carolina The Endress+Hauser F-103 Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment. It also provides in-depth training on density and concentration measurements.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F103
Basic Instrumentation School
December 9, 2013 - December 13, 2013 in Mobile, Alabama The Endress+Hauser I-101 introductory course to instrumentation provides maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations that are applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-control-training-basic
Basic Instrumentation School
December 10, 2013 - December 12, 2013 in Chalfont, Pennsylvania The Endress+Hauser I-101 introductory course to instrumentation provides maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations that are applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.
http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-control-training-basic About Endress+Hauser in the U.S. Endress+Hauser is one of the largest instrument manufacturers in the United States’ industrial automation industry – specializing in automation solutions for the Chemical, Food & Beverage, Oil & Gas, Water and Wastewater, Life Sciences, Power and Energy, Primaries, and Pulp and Paper Industries.
Endress+Hauser, a Switzerland based company, first began operations in the U.S. in 1970.
Since that time, Endress+Hauser has continued to invest in its U.S. operations - investing an average of 10% of its annual revenue into its infrastructure.
