July 24, 2011 - For new or existing applications, the FV200 Dual Bargraph meter from Fox Meter Inc. is two independent high performance meters in a single housing. The package is form-factor compatible with standard 6-inch edgewise switchboard instruments. Each high resolution 101 segment LED bar is capped with a full 4 digit bright red digital display. The101 segment tri-color LED bar can be programmed to display the signal as either: red, green, or amber.
At predefined signal levels, the FV200 can be configured to change bar color to alert the operator to a changing signal level. The bar can be set to display the signal as a single dot or the signal can be displayed as a solid filled bar.
FEATURES
- High performance delta-sigma A/D converter with over 65,000 counts of resolution for unparalleled accuracy and linearity
- Ultra bright full 4 digit alpha-numeric display with decimal point.
- High brightness, high resolution tri-color 101 segment LED bars.
- Fully programmable microprocessor based electronics.
- Menu driven set-up using 3 buttons on back of meter.
- Minimum 88k- hour MTBF (calculated).
- Input range optimized per customer requirement.
- Simplified retrofitting into existing panels with easy thru front panel mounting
- Universal direct replacement for 6-inch panel meters from all major manufacturers.
- Rugged aluminum frame and front bezel.
- Non-glarecast acrylic laser etched faceplate,per customer requirements and specifications.
- Superior accuracy and readability.
- Available with three programmable set-points with Form C output relays.
Shock and vibration resistant.
Artwork production included in base meter pricing.
Functional Choices -- Each bar is a separate and independent meter and can be configured to any of the following:
- Process: DC volts, amps, or 4 to 20 mA; dual scale factors; peak and valley displays.
- Ohmmeter: user specified resistance range.
- Straingauge: with10VDC excitation (specify signal, i.e. 30mV or 4-20mA).
- AC: volts (averaging) or amps.
- Thermocouple: specify type B, E, J, K, R, S, or T; linearized to full T/C range
- RTD: 100 Ohm platinum, 0.01 degree C or F resolution.
Available with 24 VDC excitation.
For .0385 RTD probes.
The FV200 is also available as a serial remote display. Flexibility is designed in so that the meters can be configured to meet just about any customer requirement. Price includes customer specified front legends and scales. Bargraph is menu selectable dot or filled and bottom, center or top zero.
General Specifications --
General:
- Display window - non-glare cast acryliclaser etched
- Controls - setup menu is accessed via switches recessed on rear of meter
- Connections - socketed screw terminal connectors
- Operating temperature - -55 to 85 degrees C
- Enclosure: Aluminum frame and cladding.
Outputs Options:
- Serial ASCII –Isolated RS232, RS422/485
- Relay –3 optional programmable Form C set-points, 200V @ 1A relay outputs
- Isolated 4-20mA output (requires external loop power)
Power supply Options:
- 120 VAC - 50 / 60 Hz
- 220 VAC - 50 / 60 Hz
- 6 to 14 VDC
- 6 to 14 VDC Isolated
- 10 to 30 VDC
- 6 to 24 VAC
Bar Detail:
- 101TRI-color LED segments - 4.0" display - 1% full scale resolution
Digital Display Detail:
- Full 4 digit single color digital readout above each bar - Linearity 1 count - Resolution 0.01% full scale - Height 0.13”
