This 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive.
The DMC-3x01x Motion Controller Series is Galil's latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models. Like all Galil controllers, programming the DMC-3x01x is simplified with two-letter, intuitive commands and a full set of software tools for servo tuning and analysis. The DMC-3x01x Motion Controller Series feature:
- Available as a compact card-level or box-level unit
- Connects to a stepper or servo motor amplifier of any power range
- Can be purchased with an internal 800-Watt brushless sine drive or microstepping drive which minimizes space, cost, and wiring
- Operates stand-alone or can be networked to a PC via Ethernet
- Modes of motion include point-to-point positioning, position tracking, jogging, contouring, electronic gearing and ecam.
Features include:
- Two daisy-chainable Ethernet 100 Base-T ports.
- Ethernet supports multiple masters and slaves.
- Encoder feedback up to 15 MHz.
- Non-volatile memory for programs, variables, and arrays.
- Concurrent execution of four programs.
- Optically isolated forward and reverse limit inputs and homing inputs
- 8 uncommitted, isolated inputs and 4 isolated outputs
- High speed position latch and output compare
- 2 uncommitted 12bit 0-5V analog inputs (16bit ±10V inputs on DMC-31xxx) and 1 uncommitted analog output
- Standard power input is +/-12V and 5V.
One 115kbaud RS232 port
TCP/IP, UDP and Modbus TCP master protocol for communication with I/O devices
Quadrature standard.
SSI and BiSS encoder option(SER).
Sinusoidal Encoder option (DMC-31xxx).
Main and auxiliary encoder inputs
Controller available with optional DC-DC converter with 9-48VDC single supply input.
(Option for 20-80 VDC).
For more information, visit Galil Ethernet/RS232 Single Axis Motion Controller.
