July 27, 2011 – Hexagon Metrology announced the ROMER CMS108, a high-precision, non-contact laser scanner available for their portable coordinate measuring machines. The CMS108 is most adaptable and adept at scanning a wide range of materials with enhanced sensitivity to color and surface finishes. Its improved accuracy makes it attractive for inspection and reverse engineering applications where laser scanners have been unable to meet tight tolerances. The CMS108 mounts with a kinematic joint to the seven-axis ROMER portable CMMs, which include the Absolute Arm SE and the Infinite 2.0 SC Arm.
The CMS108 has an accuracy of 20 microns, which is a 16% gain in accuracy over its previous scanning solutions. In addition, the device was engineered for applications with a wide variety of color and surface finishes. Flying dot technology allows the laser scanner to rapidly detect changes in color and surfaces via their reflectivity. An operator can scan traditionally difficult finishes, including shiny and mirrored surfaces, without making manual exposure adjustments. The laser scanner can transition from matte to shiny features without additional calibration.
With 3 different line widths and differing point densities, the CMS108 is able to perform inspection routines on small intricate parts and large surfaces. The CMS108 is available for the seven-axis Absolute Arm SE with measuring ranges of 2, 2.5, 3, 3.5, 4, and 4.5 meters.
The sensor can also be added as an upgrade to the seven-axis Infinite 2.0 SC Arm. Both products are produced in the new, state-of-the-art facility in Oceanside, California.