August 8, 2008 - Littelfuse announced its SP3000 Series of electrostatic discharge (ESD) overvoltage suppression devices for data lines and interface circuits in a broad range of equipment. Applications include PCs and PC peripherals, hand-held devices, adapter cards, and data communications equipment - including USB2.0 and IEEE1394 devices. This new series uses a steering diode architecture with an integral zener diode, fabricated with silicon avalanche technology, that protects each I/O line by routing potentially destructive surge currents to ground. The steering diodes reduce the overall off-state capacitance to an ultra-low level, which is also more stable with variations in signal voltage and frequency than typical ESD protection devices.
The result is high-level protection with minimal distortion at data rates up to 1GHz or higher. The SP3000 Series provides protection against ESD surges up to ±12kV when tested in accordance with IEC61000-4-2. Each device has a response time of less than 1ns and can handle surge currents up to 4.5A (8x20µs waveform), protecting up to four-lines (or pins) operating at 6VDC or lower.
Leakage current is less than 0.5µA. They come in surface mount SC70, MSOP10, SOT553 and SOT563 packages to meet OEM demands for high component density and efficient tape-and-reel installation. All are RoHS (Restrictions On Hazardous Substances) compliant (lead-free/Green), and available in reel pack quantities of 3000 or 5000, depending on specific part number.
Availability. OEM samples of the SP3000 Series are available from stock. Tape and reel orders typically ship 8-10 weeks ARO.
About Littelfuse
As the worldwide leader in circuit protection products and solutions with annual sales of $536.1 million in 2007, the Littelfuse portfolio is backed by industry leading technical support, design and manufacturing expertise. Littelfuse products are vital components in virtually every product that uses electrical energy, including automobiles, computers, consumer electronics, handheld devices, industrial equipment, and telecom/datacom circuits. Littelfuse offers Teccor, Wickmann and Pudenz brand circuit protection products.
In addition to its Des Plaines, Illinois, world headquarters, Littelfuse has sales, distribution, manufacturing and engineering facilities in Brazil, China, England, Germany, Hong Kong, India, Ireland, Japan, Korea, Mexico, the Netherlands, the Philippines, Singapore, Taiwan and the U.S.
