August 7, 2019 – Marktech Optoelectronics, a designer and manufacturer of standard and custom optoelectronics components and assemblies, including UV, visible, near-infrared (NIR), and short-wave infrared (SWIR) emitters, detectors, InP epiwafers, and other materials, announced the global market introduction of the Models MTPD1346D-200 and MTPD1346D-300, two InGaAs PIN photodiodes, designed for expanded infrared instrumentation and monitoring capabilities.
Marktech’s Models MTPD1346D-200 and MTPD1346D-300 are available in active area sizes of 2.0 mm and 3.0 mm, respectively, joining existing series InGaAs PIN photodiodes with 0.1 to 1.5 mm active areas.
All series models feature a 1.7 um cutoff. In addition, all large active area Marktech InGaAs PIN photodiodes offer increased light sensitivity, uniform response, low dark current, and identical wide spectral response ranges.
Typical applications for Marktech large active area InGaAs PIN photodiodes include spectrometers, thermometers, thru-water detection and chemical analysis. Available accessories for the Models MTPD1346D-200 and MTPD1346D-300 include a range of SWIR range emitters, all of which can be spectrally and mechanically matched to Marktech InGaAs PIN photodiodes within a single package. Units are also both REACH and RoHS compliant. Small-to-medium-sized volumes of standard Models MTPD1346D-200 and MTPD1346D-300 are available with 24-hour shipment from stock via Marktech distribution partner, Digi-Key Electronics.
