East Hanover, NJ - November 29, 2005 – Sensor Products LLC is widely recognized for providing pressure profiling tools and ancillary services to engineers and other professionals for their R&D, design, and testing processes. Recently, the company began a partnership with the prestigious University of Liverpool in the United Kingdom.PhD candidate Abd Rahim AbuBakar and his advisor, Huajiang Ouyang, senior lecturer and member of the Dynamics and Control RG sector of the university’s Department of Engineering, needed a way to assess disc brake contact pressure distribution and squeal. The department, well-known for research in the area of automotive engineering, began searching for a quantitative testing method to validate their study.
After extensive Internet research and referrals from colleagues, AbuBakar and Ouyang were lead to Sensor Products to try Pressurex®, a popular tactile pressure sensing film.Because friction is the most significant cause of break pad wear, AbuBakar and Ouyang used the film to capture static pressure distribution and magnitude across the brake pad surface. By evaluating this friction, the researchers believe that better design can be achieved, subsequently resulting in longer brake pad life. “Right now, no brake manufacturer can completely eliminate squeal,” said AbuBakar.
“And because of the lack of quantified research on contact pressure distribution and brake squeal, we felt compelled to comprehensively study the contact pressure changes.” He added, “Pressurex® was a crucial tool in our testing. We hope the information acquired from this research can prompt the improved quality of brake manufacturing in the future to ultimately extend brake pad life.” Pressurex® sensor film is an easy to employ non-destructive testing tool that quickly and accurately maps and measures pressure distribution and magnitude between any mating, contacting or impacting surfaces.
Able to detect pressure from 2 to 43,200 PSI or 0.14 to 3,037 kg/cm2, Pressurex® is ideal for assessing surface contact inconsistencies in gaskets, clamps, bolted joints, heat sealing elements, lamination presses, nip rolls, welding heads, clutch and brake assemblies, tire treads, connectors, heat sinks, as well as many other industrial and medical applications.Pressurex® comes in the form of a large, thin, clear Mylar® sheet, physically similar in appearance to a sheet of paper. When placed between contacting surfaces, the film instantaneously and permanently changes color. This color change is directly correlated to the specific amount of pressure applied.
Precise pressure magnitude in PSI or kg/cm2 can easily be determined by comparing color variations to a color correlation chart, conceptually similar to interpreting Litmus paper. Sensor Products LLC is able to customize Pressurex® for any application by laser cutting the film for small or precision areas and provides encasement services allowing for use in environments where water, oil or other liquids might be present.
The company provides enhanced optical imaging services for greater detail and comparative evaluation performed with their analysis system Topaq®, which is also available for lease or purchase.For a free sample of Pressurex® and complimentary Topaq® analysis, contact Sensor Products at 1.973.884.1755, [email protected] or www.sensorprod.com/pressurex .
About Sensor Products LLC
New Jersey based Sensor Products LLC, established in 1990, is a world leader in the manufacture and distribution of tactile pressure sensing solutions. Their customized and off-the-shelf products are installed within all of the Fortune 500 industrial companies as well as thousands of smaller manufacturing firms. Their sensors are used in applications as diverse as tire testing to semiconductor manufacturing and from R&D labs to space missions. Additionally, Sensor Products provides in-house and on-site stress and pressure mapping analysis, as well as a variety of regional technical seminars.
Visit them at www.sensorprod.com .
