Author Profile
59,091 Results Found
-
Industry Product
Rotork introduces SPI Smart Position Indicator
The SPI has a dial display to show the valve position locally and one or two internal switches or sensors for remote indication. The fully sealed aluminium enclosure provides a valve position signal. -
Industry Product
FCI announces enhancements to FS10i Flow Switch/Monitor
The FS10i Flow Switch/Monitor operates over a flow range in air/gas from .25 FPS to 400 SFPS [0,076 MPS to 122 MPS] and in water from 0.01 FPS to 0.5 FPS [0,003 MPS to 0,15 MPS]. Repeatability: ±0.5% of reading. -
Industry Product
ST Robotics announces Workspace Sentry collaborative robotic safety system
The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends infrared beams across the workspace. -
Industry Product
Technologic Systems announces BACnet integration support for TS-7680 single board computer
The TS-7680 was built with industry in mind and comes equipped to handle power input allowing 8 to 40 VDC as well as 10 to 28 VAC, all housed in a plastic enclosure with optional DIN mount. -
Industry Product
Abaco Systems introduces BT3-USB-MON Bus Monitor
The BT3-USB-MON is a monitor-only device that combines three tools into one product: 1553 visualization and recording software; 1553 monitoring hardware; and scope outputs for electrical analysis -
Industry Product
Mek introduces ISO-Spector S2 automated Solder Paste Inspection system
The S2 delivers 2D colour imaging using Episcopic and low angle diffuse RGB lighting systems that remove all specular reflections from solder fluxes and solder mask. -
Industry Product
Micro-Measurements announces S5198 strain gage pattern for PCB testing
Offered in two strain gage designations (C5K-XX-S5198-350/33F and C5K-XX-S5198-350/39F), the Micro-Measurements S5198 pattern provides strain detection with minimized non-uniform PCA strain gradient effects, along with operation to +200°C. -
News
SureWerx announces expansion to the US as SureWerx USA
By integrating and merging subsidiaries American Forge & Foundry Inc. and Sellstrom Manufacturing Co. based in Elgin, Illinois, SureWerx USA Inc. (the new name of the merged company) will be conducting all US operations for the SureWerx brands from one central location. -
News
ISA announces release of Safety Instrumented System Design: Techniques and Design Verification book
Starting with a description of the entire SLC process, the authors illustrate the advantages and importance of performance-based design, from conceptual design to design verification. -
Case Study
ABB installs fast-charging station for electric vehicles at Prague supermarket
This type of charging station has been installed at Lidl stores all over Europe. There are currently more than 100 charging stations in operation in Sweden, Germany, the Netherlands, Belgium, the UK, Slovakia, Poland, France, Switzerland, Spain and Hungary. -
News
Wibu-Systems announces status as Dell IoT Solutions Partner
Through this partnership, Dell customers can deploy Wibu-Systems IP protection and IoT software licensing and license tracking solution on their Dell Edge Gateway 5000 Series and Embedded Box PC 3000 and 5000 Series systems. -
Industry Product
Pickering Interfaces introduces Modular LXI Ethernet Reed Relay Matrices
The Reed Relay Matrix solution combines Pickering’s LXI Modular Chassis (model 65-200) with their new plug-in matrix module range—providing access to all signal connections on 200 pin connectors. -
Industry Product
Spirax Sarco announces PV4 and PV6 piston valves
These valves are designed to Class 800 and provide tight shutoff, suitable for steam, condensate and other liquid systems. They are available in NPT and SW versions, in sizes from ½” to 2”, in either forged carbon steel or forged stainless steel. -
Industry Product
AAEON releases new version of RICO-3288 single board computer
Powered by the Rockchip RK3288 ARM A17 quad-core processor, the RICO-3288 is designed to provide secure configuration, and supports 2GB DDR3L, offering quad-core processing and throughput from a form factor with standardized mounting points. -
Feature
Hybrid Intelligent Method for Recognition of Common Types of Control Chart Patterns
A hybrid intelligent method for recognition of the common types of control chart pattern is proposed in this ISA technical paper. -
Industry Product
Roboteq introduces SBL2360 robot controller
Roboteq’s SBL2360 is suited for use in Automatic Guided Vehicles (AGV’s), Warehouse Automation Robots, Police/Military Robots, or any other medium-power brushless motor control application. -
Case Study
ABB helps Indian railroad stations enhance energy efficiency
The 750 stations are located in the busy northern Indian part of the network, one of the most used railway corridors in the world. ABB recently reached a milestone of 5 GW of solar inverters installed, supplying some 40 percent of India's solar power at approximately 13 GW. -
Feature
Increasing Safety through Remote Proof Testing
By Teddy Tzegazeab, Rosemount Proof testing safety-instrumented systems in liquid level measurement applications has traditionally relied on workers in the field. However, new technology in modern smart devices is enabling this vital task to be performed remotely. -
Industry Product
PI announces V-403 linear motor stage
The V-408 is designed to keep cost of ownership and operation at a minimum. Two models are offered with 25mm and 50mm travel range. Integration is facilitated by the compact dimensions with a profile of 25mm. -
Industry Product
Antaira releases LNP-2804GN-SFP-T PoE+ managed Ethernet switch
Antaira’s LNP-2804GN-SFP-T is the latest rackmount industrial Gigabit PoE+ managed Ethernet switch that offers twenty-four full Gigabit Ethernet ports with a PSE maximum of 30W per port and four combo ports featuring four SFP fiber slots for connectivity or four 10/100/1000 twisted pair ports.
