December 26, 2006 - PLYMOUTH, MI -- Model 2600-060 No-Drip fluid valve is designed for precise on-off flow control of medium- to high-viscosity fluid materials. It can also be used as a dispense valve for viscous materials such as acrylic, epoxy, pvc, silicone, urethane and lubricants. With its tungsten-carbide ball-end needle and carbide seat, Model 2600-060 is built for long service life. Replacing the needle, piston and all the seals in the valve can be accomplished in less than two minutes.
The valve’s one-piece pre-assembled cartridge is the only part required and the valve does not have to be removed to perform service.The pneumatically actuated 2600-060 No-Drip Valve is rated for 5,000 PSI. Its rugged construction also includes an anti-abrasive, hard-coated needle shaft and wear-resistant fluid seals to maximize valve life.The valve body has three 3/8 NPT inlet fluid ports for easy connection and a 3/8 NPT outlet port for high-flow requirements. Precision dowel and screw holes allow easy, accurate in-line or surface mounting.
Material is delivered to the No-Drip valve by either a metering assembly or under regulated pressure from supply pumps available from Sealant Equipment & Engineering, Inc.
Detailed information about the valve is available via a direct Web site link at www.sealantequipment.com/dispensevalves-1part.htm .Sealant Equipment, a leading manufacturer of precision meter-mix dispense systems and fluid-dispense valves, is registered to ISO 9001:2000.
The company designs, manufactures and integrates precision-engineered systems and equipment to supply, proportion, control, meter, mix and dispense a wide variety of one-, two- and three-component adhesives, sealants, lubricants and other materials.
