May 9, 2010 - Semiconductor Circuits introduces the CPT7B48 “Cool Power Technologies” 12V, 7A 16th brick DC-DC converter. This open frame module provides a full 84W of 12V power @ 55C & 200lfm of airflow – ideal for distributed power architecture applications or as a fully regulated intermediate bus converter. This module is compliant with DOSA footprint and interface standards. It has a wide input voltage range of 36 to 75VDC & provides 2250VDC input to output isolation.The CPT7B48 is a high efficiency module with efficiencies exceeding 93% from ½ load through full load.
It meets EN 60950 basic insulation requirements and is UL94 V-0 flammability rated. The module complies with all of the typical industry requirements including no load operation, 100V/100mS input voltage transient and pre-biased load startup.Other features include: fixed-frequency operation, auto-restart OVP, OCP & OTP protections, UVLO with 2V hysteresis, remote sense and +10/-20% output voltage trim using industry standard equations. Remote ON/OFF is standard with positive or negative logic options available.
The module features a standard 16th brick pinout and dimensions of 1.3” L x 0.9” W (22.9mm x 33mm.)
It has a maximum height of 9.5mm (0.375”) which accommodates tight card spacing with minimal airflow blockage of downstream components.