October 23, 2011 - Servo2go introduces DMC-1417 Econo Motion Controller. The DMC-1417 can handle the most demanding applications with such features as an extra encoder input for electronic gearing, program memory with multitasking, uncommitted I/O and user-selectable stepper or servo motor control. Modes of motion include point-to-point positioning, jogging, contouring, electronic gearing and e-cam. Programming the DMC-1417 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis, ActiveX Tool Kit for Visual Basic users and a C-Programmers Tool Kit. The Econo Series controllers do not include uncommitted analog inputs and are not optoisolated.
Use the DMC-1810 Optima controller if you require these features.
Features
:
- Accepts up to 8 MHz encoder frequencies for servos and 2 MHz for steppers
- Advanced PID compensation with Velocity and Acceleration feed forward and integration limits
- Modes of motion include jogging, point-to-point positioning, contouring, electronic gearing and ECAM
- Multitasking for concurrent execution of two application programs
- Memory for application programs, variables and arrays
- Accepts inputs from two encoders for gearing or dual-loop applications
- 7 Uncommitted digital inputs, 3 digital outputs
- High Speed position capture • Forward and reverse limits and home input
- Sinusoidal commutation for brushless servo motors
- 37-Pin D-type connector
- Custom hardware and firmware options available
