December 21, 2011 - Unitronicy introduces V200-18-E46B Snap-in I/O Module . This module brings more flexibility to the Vision series controllers by supporting even more I/O, all in one low cost unit. Connecting directly to the back of a Unitronics Vision200, Vision500, Vision1040 or Vision1210 series PLC+HMI, the V200-18-E46B Snap-in module supports a total combination of 46 analog and digital inputs and outputs. Specifically, the key feature is that it can support 9 analog inputs. In total, it includes: 18 Digital inputs (including 2 shaft encoder inputs), 9 analog inputs, 15 relay outputs, and 2 high-speed digital outputs.
The Unitronics Snap-in I/Os are a convenient, affordable way to “snap” a variety of I/O combinations directly to the back of most Vision series PLC + HMI controllers. Most Vision series controllers enable the user to pick and choose from an assortment of Snap-in I/O combinations to fit their specific application needs. With additional expansion modules, mounted locally or remotely up to 1000m from the controller, Unitronics Snap-I/O configurations can be expandable up to 1024 I/O. Solitary Snap-in I/Os (without expansion units) typically range from 30 to 62 I/O. Basic Snap I/O options can include: digital and analog inputs and outputs, high-speed I/O, PT100/Thermocouple capabilities, and weight measurement.