January 11, 2013 – Vecow announces ECS-7000 fanless embedded controller that supports 3rd Gen Intel Quad-Core series processor. It has 6M Cache, up to 3.30 GHz, DDR3L and DDR3 maximum dual channel 16GB RAM, 3 independent displays (DP, DVI-D, and VGA), isolated DIO, maximum 6 GbE LANs, CFast, two 2.5” SATA 6Gp/s HDD/SSD trays, 4 COM, 4 USB 3.0 ports, JST connector, and 2 miniPCI-express, with overvoltage protection and Trusted Platform Module.
Housing and heat dispassion design allow ECS-7000 operation under hard environments. Dissipating heat from the inner high performance processor through external aluminum heat sink, ECS-7000 series can operate with performance and stability at temperatures from -25 to 70 degrees Celsius.
ECS-7000 full series powered by cutting-edge the 3rd Gen Intel Quad-Core i7 Processor (6M Cache, up to 3.3 GHz) not only increasing power efficiency as much as 25% also integrates Intel HD 4000 graphics and extremely low thermal design power as 35W providing an enhanced reliability, safety and shock resistance for fanless operation required environments. Allowing to decode multiple high-resolution full HD videos simultaneous, Intel GMA HD 4000 graphic supports Direct X 11, OpenGL 3.1, Open CL 1.1 and MPEG-2 hardware decoding and up to 3 independent displays.
With dual channel SO-DIMM DDR3 1333/1066MHz up to 16GB and quad-core processor, ECS-7000 series would be the ideal option of ultimate performance embedded system.
Rich I/O & Over-Expectation Storage Capability
Maximum 6 GbE LAN, ECS-7000 series provide stable and speedy Ethernet with 9.6 kb/s to 1 Gb/s data transmission option for high bandwidth and supports Ethernet Control Automation Technology (EtherCAT).
Security improvement with trusted platform module, TPM, ECS-7000 series also equipped with 4 COM, 4 USB 3.0, 2 USB2.0, CFast , isolated DIO, 2 mini-PCIe (1 with SIM card socket for WiFi, 3G/GPRS), 3 RS-232 and 1 RS-232/485/422, 8 in/out GPIO, and 2 front panel accessible SATA III (6Gb/s) 2.5” HDD/SSD trays with key locks.
