Articles and News

In the new and different manufacturing environment of the 21st century, the companies that can adapt, innovate and utilize global resources will generate significant growth and success.

This article was provided by Parker Compumotor, written by John Guite, Product Planning Manager for Parker Automation - Compumotor Division. Parker Compumotor is a leader in the motion control industry providing solutions for factory automation needs. They takes a system approach to solving your application and build an integrated family of products to match your needs. For more information, please visit Compumotor's website at: http://www.compumotor.com.

When it comes to robots, reality still lags science fiction. But, just because robots have not lived up to their promise in past decades does not mean that they will not arrive sooner or later. Indeed, the confluence of several advanced technologies is bringing the age of robotics ever nearer – smaller, cheaper, more practical and cost-effective.

This article explains how to monitor vibration on common plant machinery using accelerometers. It includes a review of the hardware available today and what challenges condition monitoring providers are faced with to meet the requirements of the future.

With the immense interest in the Internet and the potential of attaching control networks to the Internet, the protocol stack of choice is TCP/IP because it provides the foundation for the Internet. This article addresses issues related to the IP portion of the TCP/IP stack as it applies to control networks.

The maximum length of a 10BASE5 segment is 500 m and this would represent the network diameter of the Ethernet network if no repeaters were used. However, Ethernet can be expanded to a larger network diameter by using repeaters as long as the network diameter does not exceed the collision domain of Ethernet. This article will discuss those restrictions.