Articles and News
2,922 Results Found
-
ISA publishes book on wireless field devices
Wireless Control Foundation: Continuous and Discrete Control for the Process Industry, aims to improve wireless control planning, commissioning and troubleshooting. -
Econais releases ProbMe Secure Configuration Software
ProbMe configuration software for Econais Wi-Fi Modules, Development Kits and Reference Designs provides an easy, fast and secure way to add new devices to a network. -
Is Industrial Automation evolving to IT?
By Bill Lydon, Editor Industry 4.0, Internet of Things (IoT), Industrial Internet, Industrial Internet Protocol (IP) all relate to the modernization and improvement of industrial automation. Is industrial automation evolving to become an integral part of enterprise computing, also referred to as IT? -
Profichip joins EtherCAT Technology Group
Profichip´s EtherCAT Master and Slave ASICs can be used in all devices in the factory network. -
OPC Foundation appoints Ziad Kaakani to Board of Directors
Kaakani will replace David Eisner, who resigned his seat upon retiring from Honeywell. -
Safety over EtherCAT
By Guido Beckmann The Safety over EtherCAT (FSoE) protocol enables safety-relevant data transmission, in parallel to standard data on the same network. FSoE is a technology certified by TÜV, developed according to IEC 61508, and internationally standardized in adherence to IEC 61784-3. The protocol can be used in applications requiring a Safety Integrity level as high as SIL3. -
Watlow temperature controller Receives EtherCAT Conformance Certificate
Watlow’s EZ-ZONE passed conformance testing at the new North American EtherCAT Test Center based in Savage, Minnesota. -
UL Certifies Moxa EDR-810 Router for Hazardous Locations
Moxa received Class 1, Div. 2 certification from UL for its EDR-810 industrial multiport router, qualifying it for safe use in oil and gas refineries, offshore platforms, fueling stations, and other areas containing volatile liquids, gases or vapors. -
SKF Joins ISA100 Wireless Compliance Institute
SKF is a supplier of bearings, seals, mechatronics, lubrication systems, and services which include technical support, maintenance and reliability services, engineering consulting and training. -
Lenze adds OPC to its motion control software
EASY Starter software now contains an OPC UA Server, which now makes it possible to access Lenze devices regardless of the type of software used. -
Diagnostics with EtherCAT - Part 2
By EtherCAT Technology Group In Part 1, the Working Counter was described as a mechanism for EtherCAT master devices to cyclic-synchronously monitor slave behavior. Part 2 covers further diagnostic mechanisms that allow master devices to precisely detect the location and cause of error conditions both at the hardware and at the application level of a slave. -
Diagnostics with EtherCAT - Part 1
By EtherCAT Technology Group EtherCAT provides a powerful diagnostic mechanism that can be used by master applications to monitor the network status synchronously with the communication cycle. Master applications such as PLC programs can therefore react immediately to any error condition within the network with a simple evaluation of the Working Counter in the application software. -
Sercos powers innovative robot
The Sercos automation bus powers the revolutionary drive construction and unique rotation options of the Penta Robotics’ Veloce parallel robot. -
Profichip celebrates its 15th anniversary
In 1999, Wolfgang Seel founded the company and initially developed microchips for the PROFIBUS system – one of the most important bus systems in the automation industry. -
Elmo announces Free Online Motion Control Practice System
Elmo is offering login access to its EASII Experience RPS for anyone to explore motors and drives in action, configure the EtherCAT network, perform complex multi-axis synchronized motions, and develop IEC-61131-3 programs. -
IT meets Automation with OPC UA
By Bill Lydon, Editor The Internet of Things and Industry 4.0 visions, which includes connecting people and services, leverages open communications, like OPC UA, and embedded-to-enterprise computing. -
IP Technology-The Future for Industrial Automation
By Mike Hannah, Rockwell Automation Forecasts say that industrial automation will make up the majority of the Internet of Things by 2025, and Internet Protocol (IP)-addressable devices are the key enabling force that will get industry there. -
RACO releases AlarmAgent.info SaaS App for OPC Connectivity
AlarmAgent.info makes a system OPC-compatible, enhancing its existing real-time reporting features by sharing data communication with HMI / SCADA software and third-party customized applications. -
Innovasic certifies RapID Ethernet Solution for PROFINET v2.31
The RapID Platform with the fido5000 REM Switch chip has been certified to PROFINET v2.31 for Class B and Class C devices. -
Innovasic RapID Platform certified for EtherNet/IP
The RapID Platform with fido5000 REM Switch chip has been certified to EtherNet/IP CT11 for beacon-based DLR devices.