- December 14, 2017
The Mechanical Engineering magazine Emerging Technology Awards is the first in the 137-year history of the Society that Mechanical Engineering magazine has singled out such future-focused technologies for recognition.
December 14, 2017 - Siemens received an award from the American Society of Mechanical Engineers (ASME) for its outstanding technological achievement with the first successfully 3D- printed and fully tested gas turbine blades.
The Mechanical Engineering magazine Emerging Technology Awards is the first in the 137-year history of the Society that Mechanical Engineering magazine has singled out such future-focused technologies for recognition. The goal is to recognize some outstanding examples of what ASME calls ascending technologies: new products and processes that have left the breakthrough stage, crossed the so- called commercialization valley of death, and are poised to reshape the industries where they compete. After exclusive vetting, ASME editors selected the technologies from each of five focus areas: advanced manufacturing, automation and robotics, bioengineering, clean energy, and pressure technology.
Earlier this year, Siemens has achieved a breakthrough by finishing its first full-load engine tests for gas turbine blades completely produced using Additive Manufacturing (AM) technology. The company validated multiple 3D- printed turbine blades with a conventional blade design at full engine conditions. This means the components were tested at 13,000 revolutions per minute and temperatures beyond 1,250 degrees Celsius. Furthermore, Siemens tested a new blade design with a completely revised and improved internal cooling geometry manufactured using the AM technology.
The project team worked with blades manufactured at the Siemens 3D printing facility in Finspong, Sweden and at Materials Solutions, the recently acquired company in Worcester, UK. Materials Solutions has more than 10 years` experience in additively manufacturing parts for turbomachinery. Materials Solutions is AS 9100 certified and an approved vendor for Additive Manufacturing for leading customers in the aerospace industry. Applying its aerospace experience, Materials Solutions also supplies tooling to leading automotive companies and high performance parts in titanium and nickel super alloys for auto sports.
Additive Manufacturing has the potential to become a key technology in the production of gas turbine components. Siemens has been investing in this innovative technology right from its inception, and is now driving the industrialization and commercialization of these processes. Besides the awarded turbine blades,
The ASME distinction is the third award for this project, following the International 3D Printing Industry Award and the companywide Werner von Siemens Award. In addition to a 16-page special section of the December 2017 issue of Mechanical Engineering magazine, ASME has also produced a five-video series celebrating the technologies. Some of these videos were debuted at ASME’s largest annual event, the International Mechanical Engineering Congress and Exposition, held in Tampa in November.Learn More
Did you enjoy this great article?
Check out our free e-newsletters to read more great articles..Subscribe