- August 12, 2020
New developments in clean, renewable energy show us the path to a sustainable future.
New developments in clean, renewable energy show us the path to a sustainable future, and ICP DAS USA is committed to developing applications that will lead the way. For this application, ICP DAS USA proposes an energy storage monitoring and management system consisting of two main platforms and their respective subsystems: the battery cabinet management platform and battery information concentrator. The energy storage system is designed to take advantage of excess energy generated during peak production times, as part of a large energy storage plant, effectively managing the peaks and valleys of wind and solar energy production.
Two main platforms
Two ICP DAS USA PACs are specified for each part of the system— the battery information concentrator uses VP-25W1 and the battery cabinet management platform uses XP-8341, and both work with the battery management units (BMUs) at the facility.
Each group of systems includes a battery cabinet management platform, under which a maximum of 12 battery information concentrators can be connected. Each battery information concentrator can be connected to a maximum of 18 BMUs.
Each BMU acquires vital data from the battery packs, such as: battery power, temperature, SOC & SOH, charging current, and charging voltage. The battery information concentrator then acquires the data from its connected BMUs through CAN Bus interfaces.
Uploading the data
After collecting the information from each BMU, the battery information concentrators upload the collected data to the XP-8341 that controls its battery management platform. CAN Bus interfaces are provided to both the battery information concentrator and the battery cabinet management platform through different I-8120W I/O expansion modules.
The battery information concentrator collects data from each BMU, constantly detects the current and voltage signals from the insulation detectors in the battery cabinet—through I-7012F and I-87017W modules—and reports all data back to the battery cabinet management platform at user-scheduled intervals.
The battery cabinet management platform not only manages the status of the battery pack in each battery cabinet, but also sends the relevant information to the transmitter through the RS-232 and RS-485 interfaces. In addition, the battery cabinet management platform regularly polls the insulation detectors to determine whether any alarms have been initiated, and performs on and off control for the battery relays.
To instantly see the status of each battery cabinet at the site, all the relevant information from each battery cabinet is accessible either through the screen display on the battery cabinet management platform, or through the screen for the battery information concentrator built in to the VP-25W1 and embedded in the door of each battery cabinet.
ICP DAS USA is excited to provide safe and stable energy storage for the green technologies that are powering the feature. We are committed to providing the high quality products and technological solutions that will ensure a bright future.
About ICP DAS USA
ICP DAS USA is a manufacturer of cutting edge industrial automation and control hardware and software. It offers a broad range of flexible and cost-effective total solutions for various industries, including energy and power, factory and machine, agriculture, aerospace, oil and gas, etc. Its products range from M2M and "Internet of Things" (IoT) controllers and protocol converters to remote data acquisition I/O modules, supporting a wide range of protocols.Read more
Did you enjoy this great article?
Check out our free e-newsletters to read more great articles..Subscribe