Products for Final Control Elements
Rotork introduces CML-1500 and CML-3000 models of modulating actuators
- Rotork PLC
The actuator is capable of a maximum 4,500 lbf (20 kN) seating thrust. The sizes increase the CMA range modulating thrust performance to 3,000 lbf (13 kN) with a 114.3 mm (4.5”) stroke length for the automation of larger valves with higher pressure ratings.
Siemens introduces Sipart PS100 valve positioner
- SIEMENS
- Siemens
The Sipart PS100 is available in two enclosure variants: polycarbonate and aluminum. The Sipart PS100 uses contactless technology to detect the position of the valve. Equipped with a corrosion-resistant silencer, the Sipart PS100 is suited to applications in the chemical and power sectors.
Festo introduces CPX-FB36 digitalization solution
- Festo Corporation
The Festo CPX-FB36 is the first Rockwell Automation third-party device that provides FactoryTalk Analytics for Devices (Shelby) with valve terminal health and diagnostic details.
Fluke introduces Fluke 710 mA Loop Valve Tester
- Fluke Corporation
The Fluke 710 mA Loop Valve Tester allows technicians to source the 4-20 mA signal while it interrogates HART data to collect critical information about the valve’s position and status, providing checks of control valves while they are in place.
Eaton announces ESVL9 screw-in cartridge valve
- Eaton
Eaton’s valve offering is designed to allow customers to optimize flow forces and metering of flow to the spool–providing stable, even and manageable proportional control.
Enerpac releases ZUTP1500-S Series electric tensioning pump
- Enerpac
The ZUTP1500-S Series with a pendant-operated solenoid valve is designed for multiple bolt tensioning applications and allows for single-person operation.
Assured Automation introduces Eliminizer Series of compressed filter/dryers
- Assured Automation
- Assured Automation
The Eliminizer is constructed using a patented cyclonic inverse flow technology and has excellent water & dirt capture to 1 micron. ISO Class 2 particulate.
Eaton introduces Pro-FX Configure software as part of enhanced AxisPro industrial valve platform
- Eaton
Featuring parameter-based tuning and a complete wizard-based setup, the Pro-FX Configure 2.0 enables users to configure and tune AxisPro valves by following a step-by-step graphical workflow.
Bronkhurst introduces D-6390 MASS-STREAM mass flow meter
On the D-6390 model, the maximum measuring range has been expanded to 10,000 ln/min air equivalent. Analogue I/O signals as well as an RS232 interface are provided by default.
EXAIR releases 1/8 NPT No Drip External Mix Atomizing Spray Nozzles
Applications include painting, coating, rinsing, cooling, quenching, wetting (moistening), dust control and humidification. The Atomizing Nozzles are fully adjustable to minimize air and liquid consumption and have interchangeable liquid and air caps.