Products for Final Control Elements
Emerson releases ASCO Series 273 Pinch Valve for the life sciences market
- Emerson
The Series 273 features a pinching mechanism that remains firmly in place to provide better tube retention and eliminates breakage or damage to the soft tubing
Endress+Hauser announces updates to Picomag electromagnetic flowmeter
- Endress+Hauser, Inc.
The Picomag update enables measurement of flow of electrically conductive fluids and the process temperature and conductivity. It enables commissioning with Bluetooth using the SmartBlue App and integration with IO-Link technology.
Festo announces CPX-AP-I remote I/O system
- Festo Corporation
CPX-AP-I enables valve terminals to be moved closer to pneumatic cylinders. Process data in and out of each bus module is as much as two kilobytes. Scan cycles for a mix of both valve terminals and I/O are below one millisecond.
RTK introduces REflex Quick Change Seat Control Valve with REact 30 DC-PoP smart actuator
The REflex QCS Control Valve assembles and disassembles in four steps without the need for special tools. Plus, tool-free seat exchange allows for adaptation to changing conditions. The REact 30 DC-PoP actuator equips the REflex QCS Control Valve with smart valve technology to ensure system safety
Brooks Instrument adds EtherNet/IP interface to SLAMf Series mass flow controller (MFC) family of products.
- Brooks Instrument
The addition makes the SLAMf Series an MFC from a U.S. supplier with NEMA 4X/IP66- rating and integrated EtherNet/IP communications as standard features. Therefore, this product series is a choice for the biotechnology and food and beverage industries, where hose-down/wash-down requirements are present.
Emerson introduces Daniel 3418 Eight-Path Gas ultrasonic flow meter
- Emerson
The 3418 is an ultrasonic flow meter to pass all perturbation tests for OIML R-137 Accuracy Class 0.5 with five pipe diameters in front of the meter and without a flow conditioner.
EXAIR releases 2.5" and 3" Line Vac Conveyors
These air operated conveyors are available with smooth ends, to fit into hose or tube and secured with a simple hose clamp or they are available with NPT threaded ends, to mount onto threaded pipe. They feature large throat diameters for maximum throughput capability.
Leslie Controls introduces replacement Kylie-Mueller valves
- Leslie Controls, Inc.
After decades of service from Kylie-Mueller’s GTB and GTW control valves, operators in the oil and gas and hydroelectric industries can replace the valves with OEM-manufactured substitutes.
AutomationDirect announces GC Valves NS-Series NSF certified solenoid valves
- AutomationDirect
- AutomationDirect
These NS-Series NSF (National Sanitation Foundation) certified valves (from GC Valves) are a choice for food and beverage grade potable water applications.
SCHROEDAHL announces TDL Automatic Recirculation Valves
- Circor Instrumentation Technologies/Hoke Inc.
These all-in-one pump protection solutions are designed to keep pumping systems in process, firefighting, refinery, power and chemical applications modulating and running without cavitation or overheating
Endress+Hauser releases Proline Promass A Coriolis mass flow meter
- Endress+Hauser, Inc.
The Promass A sensor system is mounted on a base plate that acts as a “shock absorber,” effectively shielding the Coriolis measurement from outside interference, e.g. from pipe vibrations.
Enerpac announces ZC-Series cordless hydraulic pump
- Enerpac
The pumps are suited for use in industrial applications such as foundation repair, rail maintenance and concrete post-tensioning.
FCI introduces FS10i flow switch monitor for machinery manufacturers
- FCI - Fluid Components International
The measurement of compressed air flow lines with the FS10i Switch/Monitor can provide information to the equipment’s control system in order to optimize the air flow.
Kinitics Automation announces KPP05 Piston Pump
Driven by the company’s KLA05 Linear Actuator, the product requires AC or DC electrical power to operate, and allows for displacement or pressure control when additional sensors are used.
Bronkhurst releases EL-FLOW Prestige mass flow controller with on-board pressure sensor
The Multi Gas / Multi Range functionality of the EL-FLOW Prestige enables the user to select any of the installed gases and to adjust the measuring range within the boundaries of the device.
AW-LAKE and KEM Küppers announce TCM Classic, TCM Pro flow meters and TCD 9000 Series transmitters
The TCM “CLASSIC” Series meets general industrial requirements out of the box while the TCMP "PRO” Series offers units with performance specifications and diagnostic capabilities for operation in challenging environments.
SignalFire introduces ModQ Sentry Modbus flow totalizer
The ModQ is designed for data management of turbine flow meters in new and retrofit installations for a variety of industrial applications such as oil & gas, metals & mining, water & wastewater, chemical, power, food & beverage, pulp & paper, aerospace, and pharmaceutical.
EXAIR introduces 2-1/2" and 3" Heavy Duty Line Vacs
Designed for industrial applications, Heavy Duty Line Vacs have a hardened alloy construction that are designed to prevent premature wear when transporting abrasive or heavy materials like shot blast, tumbling media or metal fittings.
Sterling Systems & Controls announces Dust Containment System for bulk bag unloading systems
- Sterling Systems & Controls, Inc.
- Sterling Systems & Controls, Inc.
- Sterling Systems & Controls, Inc.
The integral dust containment system provides operator access to the bag spout for connecting a full bag or disconnecting an empty bag, within a Dust Containment Box. Operator access to a positive shutoff valve to turn flow from the bag on and off as needed is provided within the Dust Containment Box.
ABB releases IRB 6790 Foundry Prime robot
- ABB
The IRB 6790 is aimed at high-pressure water jet cleaning applications in harsh industrial environments. The IRB 6790 allows cleaning of different part geometries in the same cell with zero changeover time