Products for Final Control Elements
SENSOR Sampling Systems introduces CONCENTRIC Needle System
Standard bottle systems from SENSOR utilize one process needle for filling the bottle and another separate needle for venting it. The needles, in combination with a bottle, cap and septum, provide for the “Closed-Loop” design of the sample system.
Balluff introduces BTL7-T500 position measuring system
With its international approvals, such as ATEX and IECex, the BTL7-T500 offers a range of applications and safe operation in explosion hazard areas of Zone 0 and Zone 1. This means for example it can be used as well for continuous level measurement in refinery tanks.
Endress+Hauser introduces Proline Prosonic Flow E 100 ultrasonic flow meter
- Endress+Hauser, Inc.
The Prosonic Flow E 100 is designed for use in industrial, process, power utility, fresh water, steam circuits and boiler feedwater systems.
FCI announces enhanced version of MT100 Series of flow meters
- FCI - Fluid Components International
FCI’s MT100 Series Flow Meters, with the optional CEMS and CERMS applications package, provide a 24-hour interval automated calibration drift test of low and high span points, and interference sensor check.
Nordson ASYMTEK introduces Helios SD-960 Series Automated Dispensing System
The system supports abrasive thermal interface materials (TIM), silicones, epoxies, and grease for applications such as potting, sealing, gasketing, and structural adhesives.
Brooks Instrument announces MT3809 variable area (VA) flow meter with FOUNDATION Fieldbus transmitter
- Brooks Instrument
The Brooks Instrument MT3809 metal tube VA flow meter is designed for extreme conditions in chemicals, petrochemicals, oil and gas, and LP gas applications.
Endress+Hauser releases Picomag electromagnetic flowmeter
- Endress+Hauser, Inc.
The Picomag combines a sensor and transmitter in the same housing, with a 1.4-inch TFT color display showing flow, totalizer and temperature readings, as well as warning and alarm messages.
Fox Thermal Instruments introduces Fox Model FT4X Thermal Mass Flow Meter
- Fox Thermal Instruments, Inc.
The FT4X was designed to be used in Oil & Gas and Industrial applications. It is suitable for applications monitoring pure gases, mixed gases, and even complex flare gas compositions.
Endress+Hauser announces Heartbeat Technology for Liquiline CM44 and CM44R transmitters
- Endress+Hauser, Inc.
Heartbeat Diagnostics’ continuous analysis of transmitter/sensor system health status during operation enables recognition of related events when they occur.
Tolomatic introduces ServoChoke SVC electric choke valve actuator
- Tolomatic
The Tolomatic ServoChoke SVC electric choke valve actuator is designed to meet requirements for a more flexible high-speed actuator in performance drilling applications such as managed pressure drilling (MPD), set-point control or choke-and-kill.
Assured Automation announces WM-NLCH Series of hot water meters
- Assured Automation
- Assured Automation
Typical uses of the WM-NLCH flow meter include residential and commercial metering and sub-metering applications that use hot water: industrial food, beverage & plant process water usage, industrial laundry, industrial baking, cement mixing, apartment/condo complexes.
Electro-Chemical Devices introduces S80-T80 family of modular liquid analyzers
The family of modular S80-T80 Liquid Analyzers from Electro-Chemical Devices (ECD) is designed to provide engineers and managers with the process data they need to obtain and maintain a wide range of global, regional and local quality, environmental, safety and other certifications.
ASCO announces 128-solenoid valve expansion for Numatics G3 Series and Numatics 580 Series electronic platforms
- Emerson
The expanded G3 and 580 Series platforms feature process control architecture that permits the design engineer or end-use specifier to optimize the size of the control cabinet for the number of required valves.
FCI introduces model ST102A Flow Meter and the MT100 Series Flow Meters
- FCI - Fluid Components International
Designed specifically for flow measurement in round pipes or stacks of 12 inches [300 mm] and larger diameter, and square or rectangular ducts with cross sectional area of 100 inches [250mm] and larger, the model ST102A Flow Meter and the new MT100 Series Flow Meters from Fluid Components International (FCI) provide two to eight non-clogging, no moving parts sensing points.
L-com introduces LC series of fiber plugs, receptacles and jam nuts
- L-com, Inc.
The IP68 fiber plugs and IP68 fiber receptacles offer 400lb pull strength and 450lb crush resistance as well as protection from moisture, liquid and dust.
Festo introduces red/green demarcation for pressure and vacuum gauges
- Festo Corporation
Red/green zone dial-face adjustability allows a unified visual warning system to be applied across a range of processes for quicker recognition of issues. Festo designed these new gauges to be visible and easily understood.
Mass Flow ONLINE introduces LIQUI-VIEW Base series of flow meters
LIQUI-VIEW Base instruments offer a solution for monitoring the flow or consumption of cleaning water, cooling water or spa water.
Badger Meter introduces Blancett B3100 series of flow meters
The functionality of the B3100 flow monitor is designed for use with automated systems in remote locations, such as monitoring of meters in oil fields.
BEI Kimco announces release of LAT22-18 direct drive motor
- BEI Kimco
This direct drive motor can be integrated into a valve assembly for thermostat control as well as fuel metering, air intake shut off, fuel shut off, or air start control applications.
ASCO introduces Numatics 502 series of pneumatic control valves
- Emerson
The 18 mm, modular 502 Series is a general purpose industrial valve for automation and piloting applications in the automotive and tire, food and beverage, pharmaceutical, and packaging machinery industries. The valve meets the ISO 15407-2 standard.