Products for Final Control Elements
SENSOR Sampling Systems introduces CONCENTRIC Needle System
Standard bottle systems from SENSOR utilize one process needle for filling the bottle and another separate needle for venting it. The needles, in combination with a bottle, cap and septum, provide for the “Closed-Loop” design of the sample system.
Balluff introduces BTL7-T500 position measuring system
With its international approvals, such as ATEX and IECex, the BTL7-T500 offers a range of applications and safe operation in explosion hazard areas of Zone 0 and Zone 1. This means for example it can be used as well for continuous level measurement in refinery tanks.
Endress+Hauser introduces Proline Prosonic Flow E 100 ultrasonic flow meter
- Endress+Hauser, Inc.
The Prosonic Flow E 100 is designed for use in industrial, process, power utility, fresh water, steam circuits and boiler feedwater systems.
FCI announces enhanced version of MT100 Series of flow meters
- FCI - Fluid Components International
FCI’s MT100 Series Flow Meters, with the optional CEMS and CERMS applications package, provide a 24-hour interval automated calibration drift test of low and high span points, and interference sensor check.
Nordson ASYMTEK introduces Helios SD-960 Series Automated Dispensing System
The system supports abrasive thermal interface materials (TIM), silicones, epoxies, and grease for applications such as potting, sealing, gasketing, and structural adhesives.
Brooks Instrument announces MT3809 variable area (VA) flow meter with FOUNDATION Fieldbus transmitter
- Brooks Instrument
The Brooks Instrument MT3809 metal tube VA flow meter is designed for extreme conditions in chemicals, petrochemicals, oil and gas, and LP gas applications.
Endress+Hauser releases Picomag electromagnetic flowmeter
- Endress+Hauser, Inc.
The Picomag combines a sensor and transmitter in the same housing, with a 1.4-inch TFT color display showing flow, totalizer and temperature readings, as well as warning and alarm messages.
Fox Thermal Instruments introduces Fox Model FT4X Thermal Mass Flow Meter
- Fox Thermal Instruments, Inc.
The FT4X was designed to be used in Oil & Gas and Industrial applications. It is suitable for applications monitoring pure gases, mixed gases, and even complex flare gas compositions.
Endress+Hauser announces Heartbeat Technology for Liquiline CM44 and CM44R transmitters
- Endress+Hauser, Inc.
Heartbeat Diagnostics’ continuous analysis of transmitter/sensor system health status during operation enables recognition of related events when they occur.
Tolomatic introduces ServoChoke SVC electric choke valve actuator
- Tolomatic
The Tolomatic ServoChoke SVC electric choke valve actuator is designed to meet requirements for a more flexible high-speed actuator in performance drilling applications such as managed pressure drilling (MPD), set-point control or choke-and-kill.