The Classic Series of enclosures is designed for general electrical and electronic applications as well as applications requiring broader environmental concerns.

These limit switches are NEMA 3, 3S, 4, 4X, 6, 6P, 13, and IP67 rated for operation in a variety of industrial environments.

Design improvements include a cone seal that prevents water from accumulating at the cable entrance; rugged PBT (Polybutylene terephthalate) interiors provide resistance to moisture and temperature; and a new Gotcha ring and collapsible bushing design provides strain relief.

Patlite stack lights offer LED illumination and prism-cut lens design for enhanced visibility from any direction and are ideal for use in applications such as machine tools, packaging machines, conveyor systems, loading docks, retail center check outs and more

Designed as stand-alone controllers with expansion capabilities, these micro PLC units are available in four distinct form factors: M series (no onboard I/O), 10-point series, 18-point series and 36-point series.

Available in 120-600VAC models and a 200kA short-circuit current rating, these devices are ideal for use in ANSI/UL Type 1 or 2 SPD installations, such as AC distribution, power supplies, drive protection, fire alarms, control panels, and more.

Designed for applications such as ammeters, wattmeters, panel meters, instrumentation, and energy management systems, these current transformers offer a means of measuring primary current.

The EPS series of digital pressure sensors are designed for industrial pressure measurement and indication in both gas and liquid applications.

The rolled steel motors are available in 1800 and 3600 RPM models and feature 4:1 constant torque and 10:1 variable torque speed ranges, TEFC frames, cast aluminum end bells and removable mounting bases.

HydroMode push-to-connect fittings are designed for use with polyethylene and other flexible tubing; all fittings are made of NSF approved materials with NSF-51 and NSF-61 certifications.

The series combines a precision RTD sensing element and transmitter electronics in a single stainless steel temperature transmitter probe.

SE2 series switches offer an operating temperature range and are available with a 12-48 VDC or 18-30 VAC redundant power input, reverse polarity protection, and IP30 metal cases.

The C-more 7-inch widescreen touch panels are equipped with 800 MHz CPUs, 64k colors, and 50,000-hour non-replaceable backlights.

AutomationDirect’s Productivity Suite PLC programming software version 2.4 provides two communications enhancements for the Productivity series controllers, Custom Protocol over Ethernet (CPE) and Productivity Network (ProNET) .

Stratus enclosure air conditioners are closed-loop cooling systems designed for harsh environments, or when there are washdown requirements, heavy dust and debris, or airborne chemicals present.

The IP69K-rated LPF and SPF-series operate with most safety relays and feature plastic housings, wide sensing distances (>10mm), and a high tolerance to misalignment after sensing.

NITRA pneumatic control distribution blocks are a way to connect a bank of AVS or BVS-series valves to a controller allowing replacement of a bundle of solenoid cables with a single cable connected to an M12 or a D-sub connector.

New AC and DC discrete I/O modules include 8-point, 100-120 VAC input and output modules, 8 and 15-point, 3.3-24 VDC input and output modules and high-density, 32-point,12-24 VDC input modules.

These control and signaling devices have special design features that make the devices suitable for food processing, pharmaceutical, and medical applications.

SureMotion MXL series timing belts are 1/4-inch wide, have a 0.080-inch pitch, and are available in neoprene with fiberglass reinforcement and urethane with polyester reinforcement styles. Also referred to as sprockets, MXL-series aluminum timing pulleys have a 1/4-inch width and feature a smooth bore with setscrews, a 0.080-inch pitch and range in size from 10 to 120 teeth.