The solid-state electronic switches are available in 3-wire DC PNP and NPN normally open and PNP normally closed configurations

NITRA line of pneumatic components now includes additional fittings and valves for use with polyurethane and nylon tubing.

AutomationDirect extended its NITRA pneumatic product line to include a series of stainless steel, round body, non-repairable cylinders.

IronHorse general purpose AC motor line has been extended to include 3-phase 1200 RPM six-pole and 3600 RPM two-pole models. Six new 56C 3600 RPM rolled steel motors, and 13 new T-frame cast iron motors in 3600 and 1200 RPM models are available in sizes from 1 to 10 HP.

IronHorse general purpose AC motor line now includes 3-phase 1200 RPM six-pole and 3600 RPM two-pole models.

proSense includes phase monitoring, alternating and pump seal failure relays.

Fuji electric motor contactors line expands to offer higher AC coil voltage ranges; new SC series components operate with ranges of 440-480V and 500-550V at 60hz available in frame sizes of 43mm, 54mm and 67mm. Low-cost, 30-day return and one year warranty.

Flexible service cord is available in sizes ranging from 18 to 10 gauge, with two, three or four-conductor configurations.

ZIPports are mounted on the outside of electrical control panel boxes, and act as pass-through connections.

SC series operate with AC coil voltage ranges of 440-480V and 500-550V at 60hz and are available in frame sizes of 43mm, 54mm and 67mm.

Among the products added are supplementary circuit breaker terminal blocks and sockets.

Analog CPUs have two analog inputs and two outputs with ranges of voltage up to 5 Vdc or current up to 20 mA.

Three new CPU models with built-in analog I/O have been added to the CLICK Micro Brick programmable controller line; CPUs also have four built-in discrete inputs and four discrete sourcing, sinking or relay outputs. All CLICK CPUs are configured with easy-to-use programming software which is available as a free download.

Multiport junction blocks provide time, cost and space savings by allowing multiple sensors to be wired to a single block with one cable connecting to the control panel.

New NITRA line of pneumatic components includes flexible polyurethane and nylon tubing, push-to-connect fittings in a strong thermoplastic design in 21 types, and push-to-connect flow control valves – often referred to as pneumatic speed controllers; all products ideal for air pneumatic applications.

PSC series includes eight models with power ratings from 12W to 90W with universal 85 to 264 VAC input voltage, adjustable DC output, and output current limitation.

NITRA tubing is available in polyurethane and nylon styles, in inch and metric sizes and in 100 and 500-foot packages. Prices start at $10.25 for 100 feet.

Stride line now includes industrial-grade unmanaged Ethernet switches and media converters with aluminum housings.

IronHorse Worm gearbox line includes hollow shaft models in four frame sizes and six gear ratios from 5:1 to 60:1; constructed of cast iron one-piece housings, feature a C-flange input designed to change drive direction by 90 degrees. Mountable in any direction, except motor pointing up; available for same-day shipping.

Expanded line of SureStep, AutomationDirect’s open-loop stepper positioning system, now includes stepping motors in NEMA sizes 17, 23 and 34 to include bi-polar models; two new Advanced Programmable SureStep Drives with greater functionality and higher current capability were added plus three additional power supplies for SureStep drives and motors.