RIDERSERIES II relays include base sockets and industrial relays that can switch loads up to 16A at 24VDC or 230VAC for power or signal switching.

AcuAMP line includes current sensors, transducers, and switches, all of which mount on a DIN rail.

Fully isolated DC/DC converters are suitable for use with any equipment having inputs from 24 to 160 Vdc that need to be modified to 12 or 24 Vdc. Price: $69.

For intelligent display applications, the board is equipped with onboard HDTV support to create visually spectacular signage. It also has a VIA C7 or Eden processor, VGA, LVDS, MPEG-2 decoder and audio and storage.

Desktop power adapters are in compliance with California Energy Commission Tier 2 criteria and Energy Star Level IV standards for external switching power supplies. All are RoHS compliant, have worldwide safety certification to EN60950-1 standards, and EMI performance to Class B standards.

Upgrade CPUs provide a migration path from the installed base of Bristol Network 3000 RTUs to Bristol ControlWave remote automation system. The migration is made by replacing installed Network 3000 CPUs with CW35 and CW31CPUs.

DNA-GPS GPS receiver system adds GPS technology to PowerDNA, UEILogger and UEIPAC data acquisition and control Cubes. The unit provides location, velocity and UTC real time. Price is $495.

Enhancements include expanded screen configuration memory, increased alarm management capacity, and two multipurpose serial ports. It provides a 4 line by 20 character LCD with 20 programmable function keys and 8 programmable LED indicators, and supports up to 256 alarms.

JRBS-57 junction box provides DIN-rail mounting, rugged IP 20 design, and a BUS-in/BUS-out feature that eliminates the need for a separate splitter device.

K50 Series single-point pick-to-light sensor shows the assembler the correct order for selecting parts in a kitting operation, confirms a pick was made, and alerts the assembler that a wrong part was picked. Price: from $110.

FPM-3170G 17 in. SXGA TFT LCD Flat Panel Monitor has 1280 x 1024 resolution and Direct-VGA, DVI, video, and S-video inputs. The large screen presents vivid and sharp images. Price: $1,550.

FlowCom Model FC100 provides simultaneous flow rate and volumetric totalized flow data for Mc Propeller Series Flow Meters. The five-digit top line of the display indicates flow rate and the eight digit bottom line of the display provides volumetric flow data.

The EPX2 E/P transmitter is designed for use with normal instrument air, but it can also be used with natural gas, making it possible to use the transmitter in remote locations where no electrical power is available to drive air compressors. Its low power requirement of 3mA@12Vdc allows it to be powered by a battery or solar panel at remote sites.

C/B 4800 Series of 6U DC/ DC and AC/DC converter modules are available with output power from 2.4kW to 5kW. All modules have a standard operating temperature of –20°C to +75°C with an option for –40°C.

The b maXX 1000 frequency inverter for vector control on standard motors is available in three frame sizes for power ranges from 0.2 to 11 kW. Pulse width modulation can be set to between 1 and 15 kHz, for operation with virtually zero noise.

The Bristol ControlWave Micro Hybrid RTU supports larger applications with dual Ethernet ports that provide network segmentation without the need for external routers.

Grace Technologies is pleased to announce the new ChekVolt allows users to test for absence of voltage and provides voltage presence LED indication; all without opening enclosure doors.

AEP-A2000R Series 2KVA pure sine wave inverter is packaged in a slim, 1U rackmount design. It delivers clean output power for powering sensitive loads and for improving AC equipment performance.

Fiber Optic EMI Adapters increase shielding effectiveness and enhance front panel aesthetics compared to traditional plastic adapters. They have die cast bodies with an EMI gasket that electrically seals the adapter to the panel for applications in telecommunications, data communications and test equipment.

The e-stop station comes with a red actuator and a yellow enclosure to meet international and domestic requirements. The red switch on a yellow background normally reserved for e-stops meets OSHA, NFPA 79 and ISO 60204-1 requirements.