Teledyne Lumenera’s Lt Series Cameras offer an imaging solution and are designed specifically to meet the challenges of modern imaging systems that strive to provide vision performance while using less power.

This technology combines KC-LINK’s C0G Base Metal Electrode (BME) dielectric system with KONNEKT’s Transient Liquid Phase Sintering (TLPS) material to create a surface mount multi-chip solution suited for both packaging and applications.

The system can be used with two different methods: The temperature of people in a crowd can be recorded, or people can be checked individually for an elevated temperature. The second method provides more reliable results because the temperature measurement can be taken at the eyelid where the temperature has the strongest correlation to the body’s core temperature.

The BBS500-57 is intended for use in the verification and calibration of non-contact infrared thermometers, infrared detectors, and thermal imaging camera systems.

With dimensions of 245 x 192 x 62 mm (9.7 x 7.6 x 2.5 inches), the 6000E Series oscilloscopes fit on any workbench. Pico PC-based instruments are designed for engineers who need professional-grade test equipment that fits in limited available space, whether in a laboratory or at their home office.

A feature of Yamaha Motor’s vision system is its integration with robots by incorporating a vision board, lighting board, and tracking board in the RCX3 series multi-axis robot controller.

Matrox AltiZ 3D profile sensors have a dual optical-sensor design and data-fusion capability, which offers 3D reproduction fidelity through their ability to combat occlusion and outlier data.

This point-to-point wireless signal bridge takes analog, discrete, or Modbus signals at one location and reproduces them at a second location.

The sensor can be used in a range of applications; for example, turbidity measurement in processes within the chemical industry, concentration measurement of hot process water in the food industry, and solids measurement in industrial wastewater.

The AS-LLE Point Level Sensor can be used with most any liquid, including water, oil, hydraulic fluid, coolants, and more.

CUI offers the AMT series encoders with configurable pulses per revolution (PPR). The PPR can be set for most models using the free AMT Viewpoint software (the AMT10-series encoders are configured using DIP switches).

LA-9.5 series miniature AC-LVDTs operate from a nominal 3 Vrms, 2.5 - 3.3 kHz excitation source. They are packaged in a 0.375 inch (9.5 mm) OD SS housing with 12-inch leads and are offered with either an imperial or metric threaded 0.110 inch (2.8 mm) diameter core that works in a 0.125 inch (3.2 mm) ID bore.

The OleumTech H Series Smart Pressure Transmitters (PT’s) are intended for industrial markets including petrochemical, chemical, power, upstream oil & gas, and wastewater.

With the measurement of compressed and non-corrosive gases, it displays three parameters at once by measuring the flow, pressure, and temperature.

ST’s n rad-hard rectifiers and Schottky diodes are guaranteed by characterization to resist a total ionizing dose (TID) up to 3 Mrad (Si). The voltage drop is guaranteed at four values of operating current to let multiple different power-supply designs use a single device type.

Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm (35.433 in.), and 1000 mm ( 39.370 in.), these stages are available with either a Two-Phase Stepper Motor or with a Three-Phase Brushless Motor with a Quadrature Incremental Optical Encoder.

The groov EPIC 2.0 firmware includes updates to both of groov EPIC’s real-time control engines and provides a refresh to many ecosystem components.

The Vert-X 37E Series is hermetically sealed, without any moving seals, to IP68 and therefore provides long life even under the harshest water, dust and oil environments.

Advantech has collaborated with global semiconductor solutions provider Semtech to launch a LoRaWAN smart vibration sensor. WISE-2410 monitors surface temperatures of machines and autonomously calculates their vibration characteristics.

Designed primarily for laboratory and industrial use, the HS7 system combines a camera with a dedicated controller.