The devices are designed to aid construction of large-scale decentralized networks to allow IoT solutions for position tracking and sensor data collection.

The measuring system is equipped with an incremental 1Vpp or TTL interface and an absolute SSI encoder. The measuring length is up to 17.8 m with several rail sections, and commissioning is facilitated by the use of standard components.

Rotork’s YT-3700 and YT-3750 pneumatic smart positioners employ continuous monitoring and graphic display of valve position, set point target over time and internal circuit board temperature over time.

The digital VarioCAM HD series thermographic cameras from InfraTec are based on thermally and geometrically high-resolution microbolometer FPA detectors with up to (1,024 × 768) IR pixels

The self-contained system is designed to solve a range of complex in-line inspection applications including optical character recognition (OCR), assembly verification, and defect detection.

The cylindrical sensors can be integrated directly into the release device of the clamping system for this measurement task

The thermoMETER TIM 8 pyrometer offers automatic hot and cold spot detection in industrial applications which enables temperature control.

With its connected sensors based on radar technology and smart software, the startup's cloud-based IoT sensor solutions provide companies with relevant data for the intelligent control and regulation of production systems and machines.

With its size, the nanoScan3 opens up potential applications where space is critical, such as in mobile intralogistics, collaborative robots (cobots), or mobile assistance and service robotics on autonomous transport platforms and carts.

This family consists of 4 sensor types, in either IP67 plastic (LD30CNB) or IP69K stainless steel AISI316L (LD30ETB) housings.

Expansion modules snap onto the side of any BRX Micro PLC Unit (MPU) or BRX Remote I/O controller, creating a sturdy and rugged PLC platform.

The two variations — the BOD002M with a 50 to 100 mm working distance and a resolution down to 10 μm, and the BOD002N with a 50 to 650 mm working distance and a resolution down to 100 μm — combine the output modes of three previous models into one.

The series of metal face proximity sensors is designed to withstand the harsh conditions of typical automotive welding processes with a fluororesin coating that provides increased spatter resistance.

These sensors are suited to a range of applications including Augmented and Virtual Reality (AR/VR), Simultaneous Localization and Mapping (SLAM), and 3D scanning.

Mounted on meters including AW-Lake Gear Meters and Turbine Flow Meters, the EDGE Flow Sensor outputs a frequency, current or analog signal that gives users more installation flexibility, especially when unsure of readout equipment or a control room interface.

A camera in FLIR Systems’ optical gas imaging (OGI) series, the connected GF77a provides upstream and midstream gas processors, producers, and operators with the ability to monitor continuously for invisible, potentially dangerous methane leaks at natural gas power plants, renewable energy production facilities, industrial plants, and other locations along a natural gas supply chain.

MARK Display brings essential information right where front-line workers in the supply chain need it most: the back of the hand.

The beacons are based on the Nordic Semiconductor nRF52832 SoC and measure a 40.0 x 31.0 x 12.0 mm within a gray, plain housing, adaptable for many applications.

The congatec Embedded Vision Platform is designed for embedded vision applications such as automated checkout systems in retail, surveillance and access control systems in facility management, industrial inspection systems for quality assurance, augmented reality for maintenance, and image processing in mobile and portable medical technology.

The encoders can satisfy needs in a range of industries, including entertainment, material handling, mining and automotive manufacturing.