The TTC-6P-4 pluggable SPDs protect against overvoltages on four conductors in a width of only 6 mm. That is only 1.5 mm per conductor.

The AN110-XNX combines the NVIDIA Jetson Xavier NX and Aetina AN110 carrier board in a form factor of 87.4 x 68.2 x 52 mm (with fan).

The series consists of 28 models offering a choice of 4.5-5 / 9.6-14.4 / 12-18 / 19.2-28.8 Vin ranges and single / dual outputs from 3.3V – 15V.

The LNP-0500G-bt Ethernet switch is intended for applications that require up to 90 Watts of PoE power. When working in automation and transportation the LNP-0500G-bt-24 provides the same PoE with a range of input voltage powering the switch.

Download this eBook to learn how to take advantage of Industry 4.0 and deliver industrial edge solutions for your customers.

The M8 D-coded connectors are available with four gold-plated contacts rated for 63 V DC at 4 A, suitable for IP67 environments when mated.

When installed on a flow meter, the EDGE Electronics can force the sensor to output a frequency or analog signal output for flexibility when interfacing with readout equipment or control rooms. Modbus output also adds system compatibility for operations.

The BOXER-8130AI is built to integrate into any environment. Featuring six MIPI CSI-2 interfaces, the BOXER-8130AI can support up to six MIPI cameras.

The numerous combinations of the MIXO ONE housings and single-sized MIXO inserts will allow each module to be converted into a fully independent connector for electrical power, data transmission, optical signals, or compressed air applications.

Advantech’s SPC-500 series is designed to satisfy these requirements and withstand operation in harsh industrial environments.

Antaira Technologies’ IMP-C1000-SFP-bt series is an IP30 rated, gigabit Ethernet-to-fiber media converter featuring a 10/100/1000Tx Ethernet port.

The IR28-04 front and rear doors feature two-point latching with locks and long-lasting dual durometer EPDM gasket.

The embedded vision board has two PoE GbE LAN ports for camera interfaces and an integrated real-time vision I/O that includes 4-CH isolated DIO. The MIRU130 was designed to help developers to deploy vision-based AI applications.

The GP3D005A170B diode comes in the industry standard TO-247-2 package as well as bare die format. 10A and 20A 1700V diodes will follow shortly.

Designed for factory automation, machine vision, digital signage and a range of industrial IoT applications, the AMS210 can be outfitted with 9th/8th Gen Intel Core processors, up to 32GB of DDR4 memory and two 2.5” disk drives with RAID 0/1.

The NB302411-series NEMA enclosures are weatherproof enclosures for use in both indoor and outdoor applications. Constructed from molded fiberglass, these enclosures can be used as electrical junction boxes in high temperature or corrosive environments providing protection to equipment and operators from indirect electrical contact.

Thanks to their iron powder cores, the high-current inductors for audio applications (available in 1008 and 1213 packages) display stable behavior at high peak currents.

It is suitable for use in any system that requires human-machine interface (HMI), such as self-service ordering system, ticket machine, kiosk, digital display, cash register and kitchen display system (KDS), it enables information input, display, monitoring and preview.

The two models are the TSR 1-2433E (6~36Vin / 3.3 Vout @1A) and the TSR 1-2405E (7~36Vin / 5Vout @ 1A)

L-com has introduced a line of RG178 coaxial cable assemblies for use in RF communications, data transmission, wireless communication, GPS systems, security equipment, broadcast equipment and lab applications.