The MLSR192K-16A operates from an 8.3 to 14 VDC input, producing a single tightly regulated output at up to 16A. The output can be adjusted over a range of 0.7525V to 5.0V.

These devices have been certified in compliance with IECEx and ATEX directives and are suitable for use in mines, oil and gas facilities, agricultural applications, chemical plants, woodworking factories and milling operations.

Existing display options include analog process signals, load cell, or potentiometer inputs, and temperature inputs in either °F or °C from RTDs or thermocouples. All panels offer selectable decimal point location.

The FWM7RAZ01 supports IF (I/Q) output signals from 1Hz to 1 MHz enabling it to detect movement speeds from 6mm-per-second to 6km-per-second, within a 30-meter range.

Based on photoelectric Micromote technology, it features an LED sensor in a sensor head measuring 2.4 x 1.5 x 7 mm. Especially designed for use with thin end effectors, it features a controlled and focused light spot, allowing it to detect wafers a few μm thick.

All sizes of NITRA rodless cylinders have magnetic pistons and are double-acting. The cylinders have front and rear adjustable cushions and tapped end caps for mounting.

The integrated tool “surface OCR” recognizes and extracts character strings from surfaces. For that it uses either the scan data of the 3D-height map or the 2D intensity data.

These DC-powered (10-30V or 15-30V) threaded-barrel sensors are IP67 rated and are available with 2m pigtail cable or quick-disconnect.

Capabilities let users fine tune scaling of I/O signals, adjust excitation levels, and calibrate the bridge. Universal output supports six ranges including 4-20mA, 0-10V and ±10V. Flexible power accepts a 9-32V DC supply at the terminals and a rail power bus option can supply multiple units from a single connection or establish redundant power.

The pitch stage has cross roller guides and a range of travel of +/- 10 degrees. The maximum speed is 14 degrees per second with stepper motor driven version and 90 degrees per second with the servo motor driven versions. The 65 mm x 65 mm table has a pattern of threaded holes for fixtures or tooling and has an accuracy of 0.05degrees and repeatability of +/- 0.01degrees.

The SC-2440 is unique in that the temperature of the sensor is continuously monitored, and the circuit provides a voltage output of 0.5 to 1.2 VDC from 0 to 70° C.

FG1 series flow meters are available with 1/2", 3/4" or 1" NPT process connections and have easy-to-read flow scales in both gallons per minute (GPM) and liters per minute (LPM).

The Electro-Pneumatic Valve Positioner mounted with ControlAir’s Type 950 Explosion-proof I/P Transducer is CSA, FM, and ATEX approved for use with natural gas.

Ainstein’s WAYV IoT family features short-, mid-, and long-range sensors. These sensors enable users to track and analyze the flow of pedestrians and vehicles in a variety of situations.

The 22 mm kits cover a multi-turn measurement range and provide digital output. They offer 17-bit electronic resolution and a multi-turn measurement range of up to 32 bits.

The MC36C Series of magnetically-coded REED safety magnetic sensors are a solution to monitor the position of sliding, hinged and removable safety guards, especially in dirty and dusty environments.

ISFET Memosens CPS47D and CPS77D sensors are equipped to meet the demands of hygienic applications. They deliver stable and reproducible measured values, even after sterilization and autoclaving up to temperatures of 275 °F (135 °C); come with the usual hygienic approvals for the food and life sciences industries, such as USP, EHEDG and 3A; and are TSE/BSE-free.

The camera features a cutting-edge CMOS imager (with global shutter) capable of running at 65 frames per second in 8K TV resolution (7680 x 4320 pixels) or at 52 frames per second for full 8192 x 5460 (44.7 megapixel) 8-bit resolution.

The R2300, with a height of 58 millimeters, is a 3-D LiDAR (Light Detection And Ranging) sensor for optical angle and distance measurement in stationary and mobile applications.

The SAKOR units can be used test from two to eight pole motors ranging from 10 watts to more than 3 megawatts.