-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Industry Products
Featured Products
Scroll down to search for more products...
-
Turn Data Into Continuous Improvement
Disconnected systems slowing you down? Learn how GENESIS unifies data to support smarter, more efficient operations. -
The Next Evolution in Process Control Is Here
DeltaV™ version 16.LTS Distributed Control System (DCS) builds on decades of field-proven innovation to deliver the most robust and reliable release yet. -
2026 State of Industrial AI Report for Manufacturing
Cisco's 2026 State of Industrial AI Report, surveying 350+ manufacturing professionals across 19 countries, explores how firms adopt AI, secure networks and scale operations.
5,081 Products
-
NI releases PCI-based Oscilloscopes
PCI-5152 general-purpose digitizer converts a desktop PC into a full-featured oscilloscope. PCI-5105 eight-channel, 60 MS/s, 12-bit data acquisition board is ideal for building high-channel-count systems in application areas such as linear and phased-array ultrasonic NDT. -
Opto 22 Introduces SNAP PAC Sim software
SNAP PAC Sim software provides the functionality of a SNAP PAC programmable automation controller in a Microsoft Windows-based PC. -
Honeywell introduces LMI HMI for machine data collection
LETS Machine Interface (LMI) operator terminal enables information to be collected from production machines and fed to Honeywell’s Line Efficiency Tracking Software (LETS). -
Intermec delivers rugged EV-DO Mobile Computer
CDMA/EV-DO capable CN3 mobile computer operates with Evolution-Data Optimized (EV-DO) wireless broadband data transmission capabilities. The handheld computer will operate on release version 0 of the EV-DO specification for CDMA WWAN cellular networks. -
SKF announces lifetime monitoring system for actuators
The actuator lifetime monitoring system continuously tracks the service life status of actuators while in operation and signals when actuator replacement is necessary. This enhances the reliability, safety, and availability of actuators used in industrial equipment applications. -
Opto 22 adds SNAP I/O Modules
Models include the 32-channel SNAP-AIMA-32 current input module; 32-channel SNAP-AIV-32 voltage input module; and the 16-channel SNAP-IAC-16, SNAP-IAC-A-16, and SNAP-IDC-16 digital input modules. These I/O modules connect to and communicate with sensors, actuators, instrumentation, and equipment in industrial applications -
Axiomtek announces PANEL2155-810-FL1GEl Panel Computer
The fanless industrial grade panel computer is suitable for HMI (Human Machine Interface) applications. -
Korenix releases housing for Ethernet switches
Housing holds one JetNet 3705 4-port industrial unmanaged PoE switch, one extra uplink port, and one extra uplink Fiber port. The housing has an aluminum case. -
Advantech Launches USB I/O Modules
USB digital I/O modules include USB-4750 32-channel, USB-4751 48-channel, and USB-4751L 24-channel. All include USB connectors with screw fasteners and DIN-rail mounting kits. They draw power directly from the USB port and therefore do not require an external power supply. -
Agilent introduces 82357B USB to GPIB I/O
The 82357B provides a direct connection from a USB port on a laptop or desktop PC to GPIB instruments. Its USB 2.0 connectivity offers easy plug-and-play setup, as well as a high-speed GPIB transfer rate of 1.15 MB/s or better. -
Lanner announces EM-9360 single board computer for embedded systems
The EM-9360 is a low power SBC that offers a cost-effective solution for users requiring legacy feature support, low power and a small footprint. System designers can build on the EM-9360 with the confidence of guaranteed supply until 2010. -
Power Sources Unlimited announces TES-5 DC/DC converters
TES-5 Series of low profile, surface mount dc/dc converters offer 5W of power and a 2:1 input range of 9-18VDC, 18-36VDC, or 36-75VDC with single or dual outputs. Input to output isolation is 1500VDC. It has short circuit protection, remote on/off, operating temperature of -40ºC to +85ºC, with full load achieved up to +71ºC. -
Baumüller releases b maXX 4100 regenerative converters
The active front-end devices in the b maXX 4100 series make energy regeneration possible in any servo system. Regenerative converters are effective on large machine tools or grinding machines, and machines running in reversing duty, where sudden acceleration followed by deceleration is typical. -
GE Fanuc announces isolated Relay Output Module
The 4A Relay Output module provides 16 Form A relays for controlling output loads, such as motor starters, solenoids, and indicators. Each output point is isolated, and each has a separate common power output terminal. Outputs provide a high degree of noise immunity, minimizing the need to add external snubbers. -
ASI announces 42A DIN Rail Power Supply
Compact power supply has a universal auto-ranging input, which means the same part can be used with 340 to 550 Vac and provide a 24 Vdc output. The power supply is also available in a version that supplies a signal in the event of failure. -
Avantis enhances PRO asset management software
Enhancements provide users with better support for their reliability centered maintenance (RCM) strategies, including enforcement and validation of critical asset information required for integration with third-party root cause analysis (RCA) solutions. -
Acromag releases Virtex-II FPGA modules with digital I/O
User-configurable FPGA modules feature conduction cooling and differential digital I/O at a cost that is suitable for many mid-level computing functions. The modules provide the ability to configure custom I/O boards using application-specific instruction sets.. -
Opto 22 introduces dual Ethernet SNAP I/O Brains
The SNAP-PAC-EB1 and SNAP-PAC-EB2 I/O Processors have dual, switched 10/100 Mbps Ethernet interfaces. This built-in two-port Ethernet switch design lowers network equipment costs by making it possible to build multi-drop I/O networks over standard Ethernet cable. -
Amplicon announces Impact-R 3010 industrial computers
Impact-R 3010 series 3U 19-inch rackmount industrial computers use an Intel Core 2 Duo or Pentium 4 processor and a 3.5-inch Western Digital hard disk drive. They are powered by a 460W PS/2 form factor power supply unit. -
Lanner releases IAC-H672 SBC in a ISA half-size slot card
The IAC-H672 low power SBC has a VIA Mark processor and both PC104 and PC104+ expansion capabilities. Other features include integrated graphics with 3D support, dual simultaneous display capability, SODIMM support up to 512MB of SDRAM, and 10/100 Ethernet.
