Industry Products

FlowCom Model FC100 provides simultaneous flow rate and volumetric totalized flow data for Mc Propeller Series Flow Meters. The five-digit top line of the display indicates flow rate and the eight digit bottom line of the display provides volumetric flow data.

The EPX2 E/P transmitter is designed for use with normal instrument air, but it can also be used with natural gas, making it possible to use the transmitter in remote locations where no electrical power is available to drive air compressors. Its low power requirement of 3mA@12Vdc allows it to be powered by a battery or solar panel at remote sites.

MAE3 miniature absolute magnetic kit encoder provides shaft position information over 360° of rotation with no stops or gaps. The magnetic encoder can mount to an existing shaft to provide digital feedback information.

C-Flow Mass Coriolis flow meter product line has been expanded to include more sizes and local monitoring options. Meters are available that have process connections from ½ inch to 3 inch and measure mass flow rates as low as 11 pounds per hour to as high as 130,000 pounds per hour.

Levelflex M top-mounted guided radar (TDR) level transmitter provides measurements that are not influenced by fluctuations in density, temperature, or build-up of dust. It can measure powdery and granular bulk materials even with dust clouds, and liquids despite foam and turbulent surfaces.

The CSI 2130 Collector has high speed single-channel collection, and a full-color backlit VGA display for periodic collection of vibration data on rotating machinery. Its PeakVue processing can detect stress waves on the spot for an early indicator of bearing or gear wear.

PresencePLUS COLOR vision sensors detect an infinite number of color variations accurately. The sensor inspects for a specific color taught to it with a Color Match tool. Sensors are available in two packages: a two-piece sensor with separate DIN-mountable controller, and a one-piece version. Prices start at $3,495.

Socket iWiFi secure serial-to-WiFi embedded device server connects devices running machine-to-machine (M2M) applications to 802.11b/g wireless LANs and protects them from network attacks.

The 750-340 series bus coupler can be used to connect local or distributed I/O on a PROFINET industrial Ethernet network.

The Bristol ControlWave Micro Hybrid RTU supports larger applications with dual Ethernet ports that provide network segmentation without the need for external routers.

ExN 425/437 and ExN 1325/1337 series rotary encoders for electrical drives have an EnDat 2.2 digital, bi-directional interface in order to be a part of a safe drive. Encoders for safety-related applications are inspected for compliance with ISO 13 849-1 (which replaces EN 954-1) and IEC 61 508.

The R35i has TTL output resolution with up to 8192 cycles per revolution, (32768 counts per revolution with quadrature).

EM-9640 mini-ITX embedded motherboard supports ultra low power AMD Geode NX processors, including the AMD Geode NX1500 @ 6W and the Geode NX 1750 @ 14W, and is suitable for graphics-intense digital signage and panel PC applications.

The SQ2010 is designed for mobile data logging applications such as field research and engineering projects. This data logger is very easy to set up and use via its intuitive icon driven display and integral four button operator interface.

The e-stop station comes with a red actuator and a yellow enclosure to meet international and domestic requirements. The red switch on a yellow background normally reserved for e-stops meets OSHA, NFPA 79 and ISO 60204-1 requirements.

PCI-5152 general-purpose digitizer converts a desktop PC into a full-featured oscilloscope. PCI-5105 eight-channel, 60 MS/s, 12-bit data acquisition board is ideal for building high-channel-count systems in application areas such as linear and phased-array ultrasonic NDT.

ML housings come in a range of materials to accommodate applications in a wide variety of fluids that are part of heavy production equipment, including hydraulic oil and cooling water. Applications include the steel production, wood processing and form and fabrication industries.

R-Series SSI encoder position sensor has fast data processing and more accurate sensing for servo control applications. It has the same absolute serial encoder interface that is widely used in computer numerically controlled (CNC) and motion controls in factory automation applications.

Platform for Secure Networking (PSN) now supports NextHop Technologies GateD advanced layer 3 IPv4 and IPv6 routing software.

The actuator lifetime monitoring system continuously tracks the service life status of actuators while in operation and signals when actuator replacement is necessary. This enhances the reliability, safety, and availability of actuators used in industrial equipment applications.