The digital controller is designed for thermoelectrics and resistive heaters where tight temperature stability is required. Stability better than 0.0009°C can be achieved with thermistors.

ZX2 AirPlus, released earlier this year in Europe, with IEC ratings up to 36 kV is now also available in Chinese GB ratings up to 40.5 kV rated voltage and 2,000 A rated current. It is designed for primary power distribution to ensure grid reliability, efficiency and safety.

Mencom's Low Profile enclosures for Panel Interface Connectors (PIC). The PIC, also known as programming ports or programming interfaces, provides the ability to communicate with a device inside a cabinet without opening the cabinet door.

HEMCO Enclosures are designed to isolate distillation apparatus, HPLC equipment, sample weighing, high throughput screening, powders handling and other lab automated processes by providing exhaust air systems or HEPA filtered clean workstations.

The initial LogiSwitch product launch includes a series of panel-mount pushbutton switches and a beginning line of subminiature limit switches with the new technology.

Previous versions of the XP2i were limited to measuring absolute pressures that were 2000 psi or higher, ruling out the XP2i’s use for lower pressure applications. Now, with the expanded XP2i product offering, those applications also can utilize the XP2i digital pressure gauge.

The cabinet is available in several standard configurations, including 42 rack-mount units (U), 45U and 47U, 600 mm and 800 mm widths and 829 mm, 1029 mm and 1229 mm depths, as well as options with patented Vertical Exhaust Ducts.

The Sensepoint XRL fixed gas detector monitors industrial operations for specific hazardous gases, such as carbon monoxide or methane. Sensepoint XRL is Bluetooth-enabled, meaning it can be set up and maintained remotely using a smartphone app.

Thanks to a URCap software package, the VISOR Robotic can communicate directly with Universal Robot (UR) systems. This is designed to simplify the configuration of automation tasks.

Dragon 15 is designed to fully automate the brazing process for copper to copper, copper to steel, brass to copper and aluminum tubes.

Salisbury by Honeywell’s new PrismShield arc flash protective face shield incorporates proprietary nanotechnology that allows a wider spectrum of light to enter the lens of the face shield.

The Sensepoint XRL fixed gas detector monitors industrial operations for specific hazardous gases, such as carbon monoxide or methane. Sensepoint XRL is Bluetooth-enabled, meaning it can be set up and maintained remotely using a smartphone app.

The hybrid safety concept from Turck combines both safety I/O and general purpose I/O in a single, on-machine, remote I/O device. The CIP Safety module expands the existing hybrid safety offering, which already includes an option for PROFIsafe over PROFINET.

Major application fields include primary and secondary metals manufacturing, primary glass manufacturing, and laser welding. Featuring a 0.1 °C measurement resolution, the Endurance pyrometers also fulfill the requirements of the semiconductor industry.

The HSR robot can be switched between floor- and ceiling-mount simply by making a change in the configuration file of the controller, with no additional hardware necessary.

The c250-S is a safety controller that enables engineers to program all of the machine’s safety needs using one engineering tool based on the PLCopen standard.

This latest release increases the efficiency of remote asset management by doubling as a flow meter, as well as allowing operators to automate loop check and commissioning, reduce hard-wired input/output (I/O) devices, and extend device diagnostics.

Ideal for applications with fragile or unstable loads, the self-tracking, fully-supported belt is an designed as a solution for handling empty containers in preparation for fill lines in food and beverage operations.

The design of the NITRA rotary actuators is ideal for general material handling and other industrial applications such as conveying, clamping, transferring parts, positioning, and controlling valves. NITRA Pneumatic Grippers are used in a broad range of general automation processes such as pick & place, material transfer, clamping and indexing.

The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends infrared beams across the workspace.