The SC-2440 is unique in that the temperature of the sensor is continuously monitored, and the circuit provides a voltage output of 0.5 to 1.2 VDC from 0 to 70° C.

FG1 series flow meters are available with 1/2", 3/4" or 1" NPT process connections and have easy-to-read flow scales in both gallons per minute (GPM) and liters per minute (LPM).

The Monoxor XR is an instrument for verifying worker safety and achieving compliance with OSHA air quality regulations. It can also be used for engine tuning and diagnostics. The Monoxor XR provides visual and audible alarming for instant alerting of personnel to dangerous CO levels.

The Electro-Pneumatic Valve Positioner mounted with ControlAir’s Type 950 Explosion-proof I/P Transducer is CSA, FM, and ATEX approved for use with natural gas.

Ainstein’s WAYV IoT family features short-, mid-, and long-range sensors. These sensors enable users to track and analyze the flow of pedestrians and vehicles in a variety of situations.

The 22 mm kits cover a multi-turn measurement range and provide digital output. They offer 17-bit electronic resolution and a multi-turn measurement range of up to 32 bits.

The MC36C Series of magnetically-coded REED safety magnetic sensors are a solution to monitor the position of sliding, hinged and removable safety guards, especially in dirty and dusty environments.

ISFET Memosens CPS47D and CPS77D sensors are equipped to meet the demands of hygienic applications. They deliver stable and reproducible measured values, even after sterilization and autoclaving up to temperatures of 275 °F (135 °C); come with the usual hygienic approvals for the food and life sciences industries, such as USP, EHEDG and 3A; and are TSE/BSE-free.

The camera features a cutting-edge CMOS imager (with global shutter) capable of running at 65 frames per second in 8K TV resolution (7680 x 4320 pixels) or at 52 frames per second for full 8192 x 5460 (44.7 megapixel) 8-bit resolution.

The R2300, with a height of 58 millimeters, is a 3-D LiDAR (Light Detection And Ranging) sensor for optical angle and distance measurement in stationary and mobile applications.

The SAKOR units can be used test from two to eight pole motors ranging from 10 watts to more than 3 megawatts.

The devices offer peripherals in variants for specific requirements. The data exchange is done via CAN FD, which is downward compatible to classic CAN 2.0.

GRV-CCANI-2 (serial communication, 2 channels, CAN 2.0B, channel-to-channel isolation) is the first module in the groov EPIC platform to provide hardware support for an industrial field bus. GRV-ITM-12 (analog input, 12 channels, thermocouple or millivolt) provides a temperature sensing option with two isolated zones and 6 channels per zone.

The Plantweb Insight Network Management application provides continuous, centralized monitoring of WirelessHART networks. The Plantweb Insight Power Module Management application drills down to the device level, allowing facilities to keep their wireless devices appropriately powered so they can continuously transmit key monitoring data.

The cables are up to 20 percent thinner than previous models, have a tested service life of five million cycles and come with a 36-month guarantee.

SMART-Sensor devices can be ordered with a volatile organic compound sensor that provides relevant air quality measurement for the comfort and health of building occupants.

With EXAIR’s siphon fed atomizing nozzles, users can coat, lubricate, cool, treat and paint a variety of products using compressed air and liquids with a viscosity of up to 200 centipoise. Used with water, atomizing nozzles are a way to evenly cool hot items in an automated process.

It is suitable for determining medium to high turbidity values in a large number of applications, especially in the field of the food and beverage industry. The cleaning and sterilisation by means of CIP and SIP procedures are of course possible.

By combining OPC UA and IO-Link, Pepperl+Fuchs has opened up possibilities for end-to- end, transparent, communication from the lowest field level to the cloud.

Used in inspection labs, gas terminals, the food and beverage industry and refineries, the Series 150-Lab H2S Analyzer is capable of precision gas measurement in the low, single-digit PPB to high PPM levels.