Features:
>> Speed sensor signal input, shaping square wave signal >> 200mV peak weak signal amplification and shaping >> Sine wave, sawtooth signal input, square wave signal output >> No changing the original waveform frequency, fast response >> Input / output / power supply three-port 3000VDC isolation >> Power supply: 5V, 12V, 15V or 24V DC single power supply >> Low cost, small size, easy to use, high reliability >> Standard DIN35 rail mounting >> Size: 106.7x79.0x25.0mm >> Industrial temperature range: - 45 to + 85 ° C
Application:
>> Speed sensor signal isolation, acquisition and conversion >> Motor speed measurement >> Car ABS anti-lock braking system >> Speed signal amplification and shaping >> Ground interference suppression >> Motor speed monitoring system >> Velocity measurement alarm >> Signal no distortion transmitter and transmission
Product Listing:
|
Input Signal
|
Power
|
Output Signal
|
|||
|
Code
|
Power |
Code
|
Code
|
||
|
+/-signal input，sine wave input,peak value（VP-P）：200mV~50V
|
S1 |
24VDC |
P1 |
output level 0-5V |
O1 |
|
single signal input,
peak value（VP-P）：5V
|
S2 |
12VDC |
P2 |
output level 0-12V |
O2 |
|
single signal input, peak value（VP-P）：12V |
S3 |
5VDC |
P3 |
output level 0-24V |
O3 |
|
single signal input, peak value（VP-P）：24V |
S4 |
15VDC |
P4 |
Open collector output |
O4 |
user-defined |
Su |
user-defined |
Ou |
||
Samples: 1. Input:Speed ‚Äã‚Äãsensor, sine wave VP-P: 200mV~10V,Power Supply:24V,Output:0-5V level Type No. :DIN11 IAP S1-P1-O1 2. Input:Speed ‚Äã‚Äãsensor, sine wave VP-P: 200mV~10V,Power Supply:12V,Output:0-24V level Type No. :DIN11 IAP S1-P2-O3 3.
Input:0-5V level Power Supply:24V Output:0-24V level Type No. :DIN11 IAP S2-P1-O3 4. Input:0-5V level Power Supply:12V Output:Open collector output Type No. :DIN11 IAP S2-P2-O4 5. Input:user-defined Power Supply:24V Output:user-defined Type No.
:DIN11 IAP Su-P1-Ou 6. Input:differential signal Power Supply:24V Output:Open collector output Type No. :DIN11 IAP Su-P1-O4(Su:differential signal)