May 23, 2011- Axiomtek introduced iCON-83000 16-port 10/100Base-TX managed hardened Ethernet switch with 2 combo Gigabit ports, which fully complies with IEC 61850-3 and IEEE 1613 standards for substation automation applications, NEMA TS1 & TS2 for traffic control systems and EN50121-4 for railway applications. The iCON-83000 is designed to integrate 10/100 Mbps networks into fiber optic Gigabit backbones. To provide non-stop Ethernet connection, the iCON-83000 supports intelligent α-Ring technology which provides fast network recovery within 15ms.
This hardened industrial Ethernet switch features an IP30 protected housing with slim form factor (84 x 125 x 145 mm), a wide operating temperature range (-40°C to +75°C), DIN-rail or panel mounting capability, and redundant power inputs to give users greater flexibility for a variety of industrial automation applications. The iCON-83000 hardened managed Ethernet switch supports advanced features such as IEEE 802.1Q VLAN, port trunking, IGMP snooping, rapid spanning tree, QoS IEEE802.1p/1Q, and port mirroring. Users may choose among SNMP/RMON, web browser, or telnet for remote monitoring and configuration.
It also supports rate control, which allows users to set the maximum bandwidth on each port individually. Otherwise, the iCON-83000 switches offer IEEE802.1X port-based network access control for network security. In addition to RSTP/STP for Ethernet redundancy, the iCON-83000 series features redundant ring technology with a recovery time under 15ms. With Auto MDI/MDIX function supported, users can easily expand network without using special cabling, and the auto-negotiation capability allows users to connect client or other switches without any configuration.
Besides, the iCON-83000 comes with full wire-speed forwarding rate. Advanced Features:
- Complies with IEC61850-3 & IEEE1613 environmental requirements for power substation automation systems
- Complies with EN50121-4 environmental requirement for railway application
- Complies with IEC61000-6-2 EMC generic standard immunity for industrial environment
- Proprietary "α-ring" support for network redundancy; recovery time <15ms
- IEEE802.1w RSTP, IEEE802.1S MSTP and IEEE802.1D STP compatible
- IP multicast filtering through IGMP snooping V1, V2 & V3
- Supports port-based VLAN and IEEE802.1Q VLAN tagging and GVRP
- IEEE802.1p QoS with four priority queues MAC-based trunking with automatic link fail-over RS-232 console, Telnet, SSL/SSH, SNMP V1& V2c & V3, RMON, Web browser, and TFTP management
- Supports command line interface in RS-232 console
- Supports IEEE802.1x security
- Bandwidth rate control
- Per-port programmable MAC address locking
- Up to 24 static secure MAC addresses per port
- Port mirroring
- 1000Mbps-full-duplex, 10/100Mbps-full/half-duplex,
- Auto-negotiation, auto-MDI/MDIX
- Full wire-speed forwarding rate
- Alarms for power and port link failure by relay output
- Redundant power inputs with terminal block and DC jack
- -40°C to +75°C (-40°F to +167°F) operating temperature range
- Supports NTP
