December 12, 2011 – Palmer Instruments announces EDG Digital Pressure Gauges. With a 2.5” dial face, EDG Gauges display both positive and negative pressures on an easy to read LCD screen.
Accuracy is ±1% of full scale while settable resolutions of 0.1, 0.2, 0.5, and 1 whole unit allow flexibility in readings.
User selectable single point calibration with known pressure input minimizes errors at expected operation pressure for optimum accuracy. Standard 9V battery is good for approximately 1,500 hours (8,000 cycles) and is easy to replace. Auto-off timer feature saves battery life, allowing the gauge to be always on, or to auto shut off in increments between 30 seconds and 180 seconds. Units of measure are selectable – PSI, Bar, Kgf/cm², or KPa for standard ranges; PSI, mBar, mmHg, and inHg for compound ranges.
Models include Bottom ¼” NPT connection for versatile installation options and protective rubber boot for impact dampening. 316SS internals are available for corrosive liquid applications. Compound and standard ranges available.
