Transducers Direct engineered a remote monitoring solution for ultra-low pressure measurements via inches of Water Column.

These pressure transducers deliver reliable operation in environments with regular and prolonged exposure to harsh and potentially corrosive chemicals – even at temperatures from -30 to 130°F and depths to 450 ft.

CS328A-FRA Frequency Response Analyzer consists of a PC-hosted oscilloscope and spectrum analyzer with a built-in 65MHz isolated signal generator and PC based application software.

GDM valve connectors facilitate both reliable power supplies and secure data transmission for components such as magnetic valves, pressure transducers, temperature sensors and flow monitors.

PicoScope 4262 can analyze audio, ultrasonic and vibration signals, characterize noise in switched mode power supplies, measure distortion, and perform precision measurement tasks.

The combination scope/data-logger/IO board offers a collection of 15 I/O channels in a compact, low-cost device. Price: $159.

Powered from a PC's USB port, PS4227 includes an integrated spectrum analyzer, function generator and arbitrary waveform generator.

CGR-101 is a two-channel 10-bit 20MSa/sec 2MHz oscilloscope, two-channel spectrum-analyzer, and a 3MHz 8-bit arbitrary-waveform/standard-function generator with eight digital I/O lines.

The dual-channel, 1 GHz PXI-5154 digitizer offers up to a 2 GS/s real-time sample rate for acquisition and characterization of fast, nanosecond-edge speeds.

U8000 Series offers overvoltage and overcurrent protection that provide comprehensive damage prevention for devices under test.

GPS Toolkit for LabVIEW expands the NI RF PXI platform to include multi-satellite GPS signal simulation.

Small, lightweight instruments feature bus-powered and plug-and-play operation, which makes them suitable for portable, benchtop and OEM applications.

Powered from the USB cable, the power meter is ideal for portable applications because it consumes only 100 mA of current without an external power supply.

PXI-4065 digital multimeter provides 6½-digits of resolution at up to 10 readings per second, or up to 3,000 readings per second at lower resolutions.

Instruments include the PXIe-5122 100 MS/s 100 MHz dual-channel digitizer, and PXIe-6537 and -6536 50 MHz and 25 MHz 32-channel digital I/O modules.

PCI-5152 general-purpose digitizer converts a desktop PC into a full-featured oscilloscope. PCI-5105 eight-channel, 60 MS/s, 12-bit data acquisition board is ideal for building high-channel-count systems in application areas such as linear and phased-array ultrasonic NDT.

RF switch modules for 50 and 75 Ohm RF applications include 11 new 4x1, terminated 4x1, dual 4x1 and 8x1 multiplexers as well as quad (4) SPDT and dual-terminated SPDT general-purpose configurations. All have relay count tracking, which allows engineers to keep track of relay closures.

The PCIe-4065 DMM for PCI Express bus, and the PCI-4065 DMM for PCI, offer measurements of DC or AC voltage/current; 2- and 4-wire resistance; and diode test. The 6 1/2 digit DMMs are suitable for test and measurement facilities and original equipment manufacturers (OEMs) who embed DC or AC measurements into an end-product or test system.

NI PXI-5105 eight-channel digitizer, the lowest price-per-channel high-speed data acquisition product in its class, offers a cost-effective alternative to systems that use multiplexed A/D converters or switches to increase channel count.

The new RF and microwave signal generators extend PXI to 6.6 GHz for continuous-wave (CW) sourcing, common tunable local oscillator (LO) and stimulus-response applications. In a single 3U PXI slot, the RF and microwave signal generators also offer the best phase noise and jitter of any NI source. All seven generators use direct digital synthesis (DDS) for high-resolution frequency hopping or phase-continuous sweeping for characterization applications.